Range Rover L405 V6 Diesel Crankshaft Engine Rebuild
Add the last seven characters of your VIN in the order notes and we check the part against your vehicle before dispatch.
V6 Diesel Crankshaft Engine Rebuild for the Range Rover L405: the engine removed, stripped and rebuilt with a new crankshaft, bearings, oil pump and timing belts.
The 2.7 and 3.0 V6 diesels in the Discovery 3 and 4, the Sport and the later L322 can spin a bearing and break the crankshaft, which is an engine out job and the single largest bill these vehicles produce. The early signs are low oil pressure warnings, a knock at idle and metal in the oil. These packages rebuild the engine properly with the revised parts, rather than dropping in a used engine with the same history. The L405 is aluminium bodied with four corner air suspension and adaptive dampers, and its parts are dearer than the earlier cars for good reasons.
Specification and fitment
- Fits: Range Rover L405, chassis code L405
- Engine: 3.0 TDV6 and SDV6, 4.4 SDV8 diesel, 5.0 V8, P400e
- Production dates: 2012 to 2021
- Quality: Standard
- Part number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody
- The failure this addresses: spun big end bearing and crankshaft failure on the 2.7 and 3.0 V6 diesel
- Labour time: about 30 hours, included
- Coding: programming with a proper diagnostic system is required after fitting, and we can do it at the workshop or supply the procedure for your garage
- Also needed: a new oil cooler, which we include
- Torque: factory figures with new stretch bolts
- Weight: about 180 kg
- Warranty: three years or 36,000 miles, whichever comes first
What arrives
- Crankshaft
- Bearings
- Oil pump
- Twin timing belts
- Gaskets
- Refit and road test
Fitting
Labour guide: about 30 hours, included. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure. We do not sell particulate filter deletes, EGR blanking plates, AdBlue emulators or emissions defeat software. They are illegal on a road vehicle in the UK, an MOT failure and they void insurance.
Which version to buy
Standard is the standard specification, which is what most vehicles need and what we would quote unless you told us otherwise. There is one specification of this, because it is the one we would fit to our own vehicles and a cheaper version would not be doing you a favour.
Add the last seven characters of your VIN in the order notes and we confirm the part before dispatch. How it works
Fitted jobs carry a warranty that covers the labour too. Fitting is for UK customers at our Tydd Gote workshop.
The core charge is refunded when your old unit comes back within 30 days in rebuildable condition.
UK from £4.95, free over £150, pallet delivery for large items, worldwide priced at checkout. Rates