Discovery 3 Air Suspension Overhaul Package

Discovery 3 Air Suspension Overhaul Package

Parts Only
£1,824.00 GBP
Skip to product information
Discovery 3 Air Suspension Overhaul Package

Discovery 3 Air Suspension Overhaul Package

£1,824.00 GBP
Taxes included. Shipping calculated at checkout.
Specification

Add the last seven characters of your VIN in the order notes and we check the part against your vehicle before dispatch.

Air Suspension Overhaul Package for the Discovery 3: four air springs, a compressor, the valve block seals and a full leak test.

Air suspension fails as a system rather than a part. A leaking air spring makes the compressor run longer, the compressor gets hot and wears, and the valve block ends up working against both. Replacing the part that failed last usually means paying for the next one within a year. These packages replace the parts that wear together, and the conversions are offered honestly: coil springs are cheaper to run, lose the height adjustment and the ride quality, and need declaring to your insurer. The Discovery 3 was the first on the integrated body frame and the first with full air suspension as standard, which is where most of its bills come from.

Specification and fitment

  • Fits: Discovery 3, chassis code L319
  • Engine: 2.7 TDV6 diesel and 4.4 V8
  • Production dates: 2004 to 2009
  • Quality: Parts Only or Parts and Fitting
  • Part number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody
  • The failure this addresses: an ageing air system where one leak is cooking the compressor
  • Labour time: about 6 hours
  • Coding: a calibration or adaptation routine is required afterwards with a dealer level diagnostic system; a generic code reader cannot do it
  • Also needed: an air system calibration afterwards
  • Torque: spring upper mounts 20 Nm
  • Weight: about 38 kg
  • Warranty: two years or 24,000 miles, whichever comes first

What arrives

  • Four air springs
  • Compressor
  • Valve block seal kit
  • Pipework connectors

Fitting

Labour guide: about 6 hours. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure.

Which version to buy

Parts Only is the parts delivered to you or your garage, with our fitting notes. Parts and Fitting is the parts fitted at our workshop, road tested and with the warranty covering labour as well as parts.

01VIN checked

Add the last seven characters of your VIN in the order notes and we confirm the part before dispatch. How it works

02Parts only or fitted

Fitted jobs carry a warranty that covers the labour too. Fitting is for UK customers at our Tydd Gote workshop.

03Exchange units

The core charge is refunded when your old unit comes back within 30 days in rebuildable condition.

04Delivery

UK from £4.95, free over £150, pallet delivery for large items, worldwide priced at checkout. Rates

Often bought for the same vehicle