Range Rover L322 Transfer Box Replacement Package with Fitting

Transfer Box Replacement Package with Fitting for the Range Rover L322: the transfer box diagnosed, exchanged, fitted, calibrated and road tested.

The transfer box splits drive between the axles and gives the low range that makes these vehicles what they are. The LT230 on the Defender, Discovery 1 and Discovery 2 is nearly unbreakable if it has oil in it and is routinely found without. The two speed units on the Discovery 3 and 4, the Sport and the Range Rover are electronically shifted and fail more often at the motor and the control module than in the gears, which is worth diagnosing before you buy a whole box. The L322 is the Range Rover that most people can now afford to buy and not all can afford to run, which is exactly why honest parts prices matter on it.

Specification and fitment

• Fits: Range Rover L322, chassis code L322
• Engine: Td6, 3.6 and 4.4 TDV8 diesel, 4.4 and 4.2 V8, 5.0 V8
• Production dates: 2002 to 2012
• Quality: Remanufactured
• Part number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody
• The failure this addresses: confirmed internal transfer box failure
• Labour time: about 7 hours, included
• Coding: a calibration or adaptation routine is required afterwards with a dealer level diagnostic system; a generic code reader cannot do it
• Also needed: nothing
• Torque: factory figures
• Weight: about 52 kg
• Warranty: three years or 36,000 miles, whichever comes first

What arrives

• Transfer box
• Fitting
• Calibration
• Road test

Fitting

Labour guide: about 7 hours, included. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure.

Which version to buy

Remanufactured is stripped to the casting, measured, rebuilt with new bearings seals and wear parts and rig tested, with a surcharge refunded on your old unit. There is one specification of this, because it is the one we would fit to our own vehicles and a cheaper version would not be doing you a favour.