Freelander 1 Complete Driveline Overhaul

Freelander 1 Complete Driveline Overhaul

Parts Only
Sale price  £2,124.00 GBP Regular price £2,574.00 GBP
Skip to product information
Freelander 1 Complete Driveline Overhaul

Freelander 1 Complete Driveline Overhaul

Sale price  £2,124.00 GBP Regular price £2,574.00 GBP
Taxes included. Shipping calculated at checkout.
Specification

Add the last seven characters of your VIN in the order notes and we check the part against your vehicle before dispatch.

Complete Driveline Overhaul for the Freelander 1: the transfer unit, propshaft, rear drive unit and every driveline oil, done once and done together.

The IRD, or power transfer unit on the later cars, takes drive from the gearbox to the propshaft. On the Freelander 1 it fails because the viscous coupling in the propshaft line seizes and fights it, and the commonest cause of that is one tyre different from the other three. On the Freelander 2, Evoque and Discovery Sport the unit runs hot, the oil breaks down, and the bearings and seals go. Every unit here comes with the advice that stops it happening again, which is four matching tyres at matching pressures and an oil change the factory schedule does not ask for. The Freelander 1 runs an IRD, a viscous coupling and a rear diff in one line, and all three live or die by whether the four tyres match.

Specification and fitment

  • Fits: Freelander 1, chassis code L314
  • Engine: 1.8 K Series, 2.0 L Series and Td4 diesel, 2.5 KV6
  • Production dates: 1997 to 2006
  • Quality: Parts Only or Parts and Fitting
  • Part number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody
  • The failure this addresses: the chain of driveline failures that follows one worn unit on these vehicles
  • Labour time: about 9 hours
  • Coding: a calibration or adaptation routine is required afterwards with a dealer level diagnostic system; a generic code reader cannot do it
  • Also needed: four matching tyres
  • Torque: to factory figures, supplied
  • Weight: about 64 kg
  • Warranty: three years or 36,000 miles, whichever comes first

What arrives

  • Transfer unit
  • Propshaft with new bearings
  • Rear drive unit
  • All driveline oils

Fitting

Labour guide: about 9 hours. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure.

Which version to buy

Parts Only is the parts delivered to you or your garage, with our fitting notes. Parts and Fitting is the parts fitted at our workshop, road tested and with the warranty covering labour as well as parts.

01VIN checked

Add the last seven characters of your VIN in the order notes and we confirm the part before dispatch. How it works

02Parts only or fitted

Fitted jobs carry a warranty that covers the labour too. Fitting is for UK customers at our Tydd Gote workshop.

03Exchange units

The core charge is refunded when your old unit comes back within 30 days in rebuildable condition.

04Delivery

UK from £4.95, free over £150, pallet delivery for large items, worldwide priced at checkout. Rates

Often bought for the same vehicle