Discovery 1 Winch Bumper and Recovery Kit Package

Discovery 1 Winch Bumper and Recovery Kit Package

Parts Only
£2,674.00 GBP
Skip to product information
Discovery 1 Winch Bumper and Recovery Kit Package

Discovery 1 Winch Bumper and Recovery Kit Package

£2,674.00 GBP
Taxes included. Shipping calculated at checkout.
Specification

Add the last seven characters of your VIN in the order notes and we check the part against your vehicle before dispatch.

Winch Bumper and Recovery Kit Package for the Discovery 1: the winch bumper package plus a full recovery kit and rated recovery points front and rear.

A winch is rated for straight line pulling, and the rule we work to is a winch rated at one and a half times the gross vehicle weight, because mud, gradient and a bogged vehicle all multiply the load. Every package here is sized to the vehicle rather than to the box, with a bumper tested to carry the winch, the correct cable or synthetic rope, and the wiring and isolator to run it safely. The Discovery 1 shares its chassis design and drivetrain with the Defender and the Range Rover Classic, and it rusts in the same places.

Specification and fitment

  • Fits: Discovery 1, chassis code LJ
  • Engine: 200Tdi and 300Tdi diesel, 3.5 and 3.9 V8
  • Production dates: 1989 to 1998
  • Quality: Parts Only or Parts and Fitting
  • Part number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody
  • The failure this addresses: being stuck with nothing rated to pull from
  • Labour time: about 7 hours
  • Coding: programming with a proper diagnostic system is required after fitting, and we can do it at the workshop or supply the procedure for your garage
  • Also needed: nothing
  • Torque: bumper 110 Nm, recovery points to spec
  • Weight: about 78 kg
  • Warranty: two years or 24,000 miles, whichever comes first

What arrives

  • Winch
  • Bumper
  • Rope
  • Recovery points
  • Snatch block
  • Shackles
  • Tree strop
  • Kinetic rope

Fitting

Labour guide: about 7 hours. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure. Any modification that changes ride height, tyre size, weight or appearance must be declared to your insurer before you drive the vehicle. Raised vehicles need the headlamp aim reset and a four wheel alignment, and the MOT tester will look at both.

Which version to buy

Parts Only is the parts delivered to you or your garage, with our fitting notes. Parts and Fitting is the parts fitted at our workshop, road tested and with the warranty covering labour as well as parts.

01VIN checked

Add the last seven characters of your VIN in the order notes and we confirm the part before dispatch. How it works

02Parts only or fitted

Fitted jobs carry a warranty that covers the labour too. Fitting is for UK customers at our Tydd Gote workshop.

03Exchange units

The core charge is refunded when your old unit comes back within 30 days in rebuildable condition.

04Delivery

UK from £4.95, free over £150, pallet delivery for large items, worldwide priced at checkout. Rates

Often bought for the same vehicle