{"title":"Suspension and lift kits","description":"\u003cp\u003eLift kits, heavy duty suspension packages, dampers and suspension refresh packages. Declare lift kits to your insurer.\u003c\/p\u003e","products":[{"product_id":"defender-90-two-inch-lift-kit-with-fitting","title":"Defender 90 Two Inch Lift Kit with Fitting","description":"\u003cp\u003eTwo Inch Lift Kit with Fitting for the Defender 90: springs, dampers, extended brake hoses, caster correction and fitting with alignment.\u003c\/p\u003e\u003cp\u003eA modest lift gives clearance for larger tyres and better approach and departure angles. Too much lift, or a lift without the matching parts, gives worse handling, worn joints and propshaft vibration. Our kits are the height we would run ourselves, with the parts that height actually needs, and we say plainly what changes on the road. The 90 is the short wheelbase and the one that gets used hardest off road, so the parts on it are the ones we see worn out fastest.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Defender 90, chassis code LD 90\u003c\/li\u003e\n\u003cli\u003eEngine: 200Tdi, 300Tdi, Td5, 2.4 and 2.2 Puma diesel\u003c\/li\u003e\n\u003cli\u003eProduction dates: 1983 to 2016\u003c\/li\u003e\n\u003cli\u003eQuality: Parts Only or Fitted With Alignment\u003c\/li\u003e\n\u003cli\u003ePart number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody\u003c\/li\u003e\n\u003cli\u003eThe failure this addresses: insufficient clearance for larger tyres\u003c\/li\u003e\n\u003cli\u003eLabour time: about 6 hours, included\u003c\/li\u003e\n\u003cli\u003eCoding: none required. Fit it and drive\u003c\/li\u003e\n\u003cli\u003eAlso needed: insurer notification and a headlamp aim\u003c\/li\u003e\n\u003cli\u003eTorque: factory figures\u003c\/li\u003e\n\u003cli\u003eWeight: about 70 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: two years or 24,000 miles, whichever comes first\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour springs\u003c\/li\u003e\n\u003cli\u003eFour dampers\u003c\/li\u003e\n\u003cli\u003eBrake hoses\u003c\/li\u003e\n\u003cli\u003eCaster correction\u003c\/li\u003e\n\u003cli\u003eAlignment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eLabour guide: about 6 hours, included. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure. Any modification that changes ride height, tyre size, weight or appearance must be declared to your insurer before you drive the vehicle. Raised vehicles need the headlamp aim reset and a four wheel alignment, and the MOT tester will look at both.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered to you or your garage, with our fitting notes. Fitted With Alignment is fitted at our workshop with a four wheel alignment and headlamp aim afterwards, which a raised or modified vehicle needs.\u003c\/p\u003e","brand":"Solihull Spares","offers":[{"title":"Parts Only","offer_id":54809460310349,"sku":"SLS-LFT-001-PO","price":1399.0,"currency_code":"GBP","in_stock":true},{"title":"Fitted With Alignment","offer_id":54809460343117,"sku":"SLS-LFT-001-FWA","price":1899.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/6247\/2269\/files\/Defender_90_Two_Inch_Lift_Kit_with_Fitting_098e0963-8d27-4512-89e4-cba79f73427c.jpg?v=1790171167"},{"product_id":"defender-110-two-inch-lift-kit-with-fitting","title":"Defender 110 Two Inch Lift Kit with Fitting","description":"\u003cp\u003eTwo Inch Lift Kit with Fitting for the Defender 110: springs, dampers, extended brake hoses, caster correction and fitting with alignment.\u003c\/p\u003e\u003cp\u003eA modest lift gives clearance for larger tyres and better approach and departure angles. Too much lift, or a lift without the matching parts, gives worse handling, worn joints and propshaft vibration. Our kits are the height we would run ourselves, with the parts that height actually needs, and we say plainly what changes on the road. The 110 is the working Defender: farms, estates, utilities and expeditions, usually loaded and usually towing.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Defender 110, chassis code LD 110\u003c\/li\u003e\n\u003cli\u003eEngine: 200Tdi, 300Tdi, Td5, 2.4 and 2.2 Puma diesel\u003c\/li\u003e\n\u003cli\u003eProduction dates: 1983 to 2016\u003c\/li\u003e\n\u003cli\u003eQuality: Parts Only or Fitted With Alignment\u003c\/li\u003e\n\u003cli\u003ePart number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody\u003c\/li\u003e\n\u003cli\u003eThe failure this addresses: insufficient clearance for larger tyres\u003c\/li\u003e\n\u003cli\u003eLabour time: about 6 hours, included\u003c\/li\u003e\n\u003cli\u003eCoding: none required. Fit it and drive\u003c\/li\u003e\n\u003cli\u003eAlso needed: insurer notification and a headlamp aim\u003c\/li\u003e\n\u003cli\u003eTorque: factory figures\u003c\/li\u003e\n\u003cli\u003eWeight: about 70 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: two years or 24,000 miles, whichever comes first\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour springs\u003c\/li\u003e\n\u003cli\u003eFour dampers\u003c\/li\u003e\n\u003cli\u003eBrake hoses\u003c\/li\u003e\n\u003cli\u003eCaster correction\u003c\/li\u003e\n\u003cli\u003eAlignment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eLabour guide: about 6 hours, included. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure. Any modification that changes ride height, tyre size, weight or appearance must be declared to your insurer before you drive the vehicle. Raised vehicles need the headlamp aim reset and a four wheel alignment, and the MOT tester will look at both.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered to you or your garage, with our fitting notes. Fitted With Alignment is fitted at our workshop with a four wheel alignment and headlamp aim afterwards, which a raised or modified vehicle needs.\u003c\/p\u003e","brand":"Solihull Spares","offers":[{"title":"Parts Only","offer_id":54809460375885,"sku":"SLS-LFT-002-PO","price":1474.0,"currency_code":"GBP","in_stock":true},{"title":"Fitted With Alignment","offer_id":54809460408653,"sku":"SLS-LFT-002-FWA","price":1999.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/6247\/2269\/files\/Defender_110_Two_Inch_Lift_Kit_with_Fitting_e565e809-240f-4820-bc19-61d4318c2c5e.jpg?v=1790171167"},{"product_id":"defender-130-two-inch-lift-kit-with-fitting","title":"Defender 130 Two Inch Lift Kit with Fitting","description":"\u003cp\u003eTwo Inch Lift Kit with Fitting for the Defender 130: springs, dampers, extended brake hoses, caster correction and fitting with alignment.\u003c\/p\u003e\u003cp\u003eA modest lift gives clearance for larger tyres and better approach and departure angles. Too much lift, or a lift without the matching parts, gives worse handling, worn joints and propshaft vibration. Our kits are the height we would run ourselves, with the parts that height actually needs, and we say plainly what changes on the road. The 130 is the long wheelbase crew cab and pick up, and it carries its weight on the rear axle, which changes which parts wear first.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Defender 130, chassis code LD 130\u003c\/li\u003e\n\u003cli\u003eEngine: 300Tdi, Td5, 2.4 and 2.2 Puma diesel\u003c\/li\u003e\n\u003cli\u003eProduction dates: 1984 to 2016\u003c\/li\u003e\n\u003cli\u003eQuality: Parts Only or Fitted With Alignment\u003c\/li\u003e\n\u003cli\u003ePart number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody\u003c\/li\u003e\n\u003cli\u003eThe failure this addresses: insufficient clearance for larger tyres\u003c\/li\u003e\n\u003cli\u003eLabour time: about 6 hours, included\u003c\/li\u003e\n\u003cli\u003eCoding: none required. Fit it and drive\u003c\/li\u003e\n\u003cli\u003eAlso needed: insurer notification and a headlamp aim\u003c\/li\u003e\n\u003cli\u003eTorque: factory figures\u003c\/li\u003e\n\u003cli\u003eWeight: about 70 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: two years or 24,000 miles, whichever comes first\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour springs\u003c\/li\u003e\n\u003cli\u003eFour dampers\u003c\/li\u003e\n\u003cli\u003eBrake hoses\u003c\/li\u003e\n\u003cli\u003eCaster correction\u003c\/li\u003e\n\u003cli\u003eAlignment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eLabour guide: about 6 hours, included. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure. Any modification that changes ride height, tyre size, weight or appearance must be declared to your insurer before you drive the vehicle. Raised vehicles need the headlamp aim reset and a four wheel alignment, and the MOT tester will look at both.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered to you or your garage, with our fitting notes. Fitted With Alignment is fitted at our workshop with a four wheel alignment and headlamp aim afterwards, which a raised or modified vehicle needs.\u003c\/p\u003e","brand":"Solihull Spares","offers":[{"title":"Parts Only","offer_id":54809460441421,"sku":"SLS-LFT-003-PO","price":1549.0,"currency_code":"GBP","in_stock":true},{"title":"Fitted With Alignment","offer_id":54809460474189,"sku":"SLS-LFT-003-FWA","price":2124.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/6247\/2269\/files\/Defender_130_Two_Inch_Lift_Kit_with_Fitting_07a38203-e2d7-4b9e-bf27-4485b8096ad7.jpg?v=1790171168"},{"product_id":"discovery-1-two-inch-lift-kit-with-fitting","title":"Discovery 1 Two Inch Lift Kit with Fitting","description":"\u003cp\u003eTwo Inch Lift Kit with Fitting for the Discovery 1: springs, dampers, extended brake hoses, caster correction and fitting with alignment.\u003c\/p\u003e\u003cp\u003eA modest lift gives clearance for larger tyres and better approach and departure angles. Too much lift, or a lift without the matching parts, gives worse handling, worn joints and propshaft vibration. Our kits are the height we would run ourselves, with the parts that height actually needs, and we say plainly what changes on the road. The Discovery 1 shares its chassis design and drivetrain with the Defender and the Range Rover Classic, and it rusts in the same places.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Discovery 1, chassis code LJ\u003c\/li\u003e\n\u003cli\u003eEngine: 200Tdi and 300Tdi diesel, 3.5 and 3.9 V8\u003c\/li\u003e\n\u003cli\u003eProduction dates: 1989 to 1998\u003c\/li\u003e\n\u003cli\u003eQuality: Parts Only or Fitted With Alignment\u003c\/li\u003e\n\u003cli\u003ePart number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody\u003c\/li\u003e\n\u003cli\u003eThe failure this addresses: insufficient clearance for larger tyres\u003c\/li\u003e\n\u003cli\u003eLabour time: about 6 hours, included\u003c\/li\u003e\n\u003cli\u003eCoding: none required. Fit it and drive\u003c\/li\u003e\n\u003cli\u003eAlso needed: insurer notification and a headlamp aim\u003c\/li\u003e\n\u003cli\u003eTorque: factory figures\u003c\/li\u003e\n\u003cli\u003eWeight: about 70 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: two years or 24,000 miles, whichever comes first\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour springs\u003c\/li\u003e\n\u003cli\u003eFour dampers\u003c\/li\u003e\n\u003cli\u003eBrake hoses\u003c\/li\u003e\n\u003cli\u003eCaster correction\u003c\/li\u003e\n\u003cli\u003eAlignment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eLabour guide: about 6 hours, included. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure. Any modification that changes ride height, tyre size, weight or appearance must be declared to your insurer before you drive the vehicle. Raised vehicles need the headlamp aim reset and a four wheel alignment, and the MOT tester will look at both.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered to you or your garage, with our fitting notes. Fitted With Alignment is fitted at our workshop with a four wheel alignment and headlamp aim afterwards, which a raised or modified vehicle needs.\u003c\/p\u003e","brand":"Solihull Spares","offers":[{"title":"Parts Only","offer_id":54809460834637,"sku":"SLS-LFT-004-PO","price":1349.0,"currency_code":"GBP","in_stock":true},{"title":"Fitted With Alignment","offer_id":54809460867405,"sku":"SLS-LFT-004-FWA","price":1824.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/6247\/2269\/files\/Discovery_1_Two_Inch_Lift_Kit_with_Fitting_6bb9151c-c250-4e7e-80c3-bf09848944d0.jpg?v=1790171167"},{"product_id":"discovery-2-two-inch-lift-kit-with-fitting","title":"Discovery 2 Two Inch Lift Kit with Fitting","description":"\u003cp\u003eTwo Inch Lift Kit with Fitting for the Discovery 2: springs, dampers, extended brake hoses, caster correction and fitting with alignment.\u003c\/p\u003e\u003cp\u003eA modest lift gives clearance for larger tyres and better approach and departure angles. Too much lift, or a lift without the matching parts, gives worse handling, worn joints and propshaft vibration. Our kits are the height we would run ourselves, with the parts that height actually needs, and we say plainly what changes on the road. The Discovery 2 is the Td5 era, with self levelling rear air on some cars and ACE active roll control on others, and both matter when you order suspension.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Discovery 2, chassis code L318\u003c\/li\u003e\n\u003cli\u003eEngine: Td5 diesel and 4.0 V8\u003c\/li\u003e\n\u003cli\u003eProduction dates: 1998 to 2004\u003c\/li\u003e\n\u003cli\u003eQuality: Parts Only or Fitted With Alignment\u003c\/li\u003e\n\u003cli\u003ePart number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody\u003c\/li\u003e\n\u003cli\u003eThe failure this addresses: insufficient clearance for larger tyres\u003c\/li\u003e\n\u003cli\u003eLabour time: about 6 hours, included\u003c\/li\u003e\n\u003cli\u003eCoding: none required. Fit it and drive\u003c\/li\u003e\n\u003cli\u003eAlso needed: insurer notification and a headlamp aim\u003c\/li\u003e\n\u003cli\u003eTorque: factory figures\u003c\/li\u003e\n\u003cli\u003eWeight: about 70 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: two years or 24,000 miles, whichever comes first\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour springs\u003c\/li\u003e\n\u003cli\u003eFour dampers\u003c\/li\u003e\n\u003cli\u003eBrake hoses\u003c\/li\u003e\n\u003cli\u003eCaster correction\u003c\/li\u003e\n\u003cli\u003eAlignment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eLabour guide: about 6 hours, included. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure. Any modification that changes ride height, tyre size, weight or appearance must be declared to your insurer before you drive the vehicle. Raised vehicles need the headlamp aim reset and a four wheel alignment, and the MOT tester will look at both.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered to you or your garage, with our fitting notes. Fitted With Alignment is fitted at our workshop with a four wheel alignment and headlamp aim afterwards, which a raised or modified vehicle needs.\u003c\/p\u003e","brand":"Solihull Spares","offers":[{"title":"Parts Only","offer_id":54809460900173,"sku":"SLS-LFT-005-PO","price":1399.0,"currency_code":"GBP","in_stock":true},{"title":"Fitted With Alignment","offer_id":54809460932941,"sku":"SLS-LFT-005-FWA","price":1899.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/6247\/2269\/files\/Discovery_2_Two_Inch_Lift_Kit_with_Fitting_33259077-dae7-47bc-bafe-071433037232.jpg?v=1790171167"},{"product_id":"new-defender-l663-two-inch-lift-kit-with-fitting","title":"New Defender L663 Two Inch Lift Kit with Fitting","description":"\u003cp\u003eTwo Inch Lift Kit with Fitting for the New Defender L663: springs, dampers, extended brake hoses, caster correction and fitting with alignment.\u003c\/p\u003e\u003cp\u003eA modest lift gives clearance for larger tyres and better approach and departure angles. Too much lift, or a lift without the matching parts, gives worse handling, worn joints and propshaft vibration. Our kits are the height we would run ourselves, with the parts that height actually needs, and we say plainly what changes on the road. The new Defender is a monocoque on air or coil springs with electronic everything, and nearly every module on it wants programming after it is fitted.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: New Defender L663, chassis code L663\u003c\/li\u003e\n\u003cli\u003eEngine: D200 D250 and D300 Ingenium six cylinder diesel, P300 and P400 petrol, P400e\u003c\/li\u003e\n\u003cli\u003eProduction dates: 2020 on\u003c\/li\u003e\n\u003cli\u003eQuality: Parts Only or Fitted With Alignment\u003c\/li\u003e\n\u003cli\u003ePart number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody\u003c\/li\u003e\n\u003cli\u003eThe failure this addresses: insufficient clearance for larger tyres\u003c\/li\u003e\n\u003cli\u003eLabour time: about 6 hours, included\u003c\/li\u003e\n\u003cli\u003eCoding: none required. Fit it and drive\u003c\/li\u003e\n\u003cli\u003eAlso needed: insurer notification and a headlamp aim\u003c\/li\u003e\n\u003cli\u003eTorque: factory figures\u003c\/li\u003e\n\u003cli\u003eWeight: about 70 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: two years or 24,000 miles, whichever comes first\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour springs\u003c\/li\u003e\n\u003cli\u003eFour dampers\u003c\/li\u003e\n\u003cli\u003eBrake hoses\u003c\/li\u003e\n\u003cli\u003eCaster correction\u003c\/li\u003e\n\u003cli\u003eAlignment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eLabour guide: about 6 hours, included. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure. Any modification that changes ride height, tyre size, weight or appearance must be declared to your insurer before you drive the vehicle. Raised vehicles need the headlamp aim reset and a four wheel alignment, and the MOT tester will look at both.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered to you or your garage, with our fitting notes. Fitted With Alignment is fitted at our workshop with a four wheel alignment and headlamp aim afterwards, which a raised or modified vehicle needs.\u003c\/p\u003e","brand":"Solihull Spares","offers":[{"title":"Parts Only","offer_id":54809460965709,"sku":"SLS-LFT-006-PO","price":1699.0,"currency_code":"GBP","in_stock":true},{"title":"Fitted With Alignment","offer_id":54809460998477,"sku":"SLS-LFT-006-FWA","price":2324.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/6247\/2269\/files\/New_Defender_L663_Two_Inch_Lift_Kit_with_Fitting_7fe01839-2e54-4b6e-a929-ef81293a97ff.jpg?v=1790171167"},{"product_id":"defender-90-heavy-duty-suspension-package","title":"Defender 90 Heavy Duty Suspension Package","description":"\u003cp\u003eHeavy Duty Suspension Package for the Defender 90: heavy duty springs and dampers rated for a permanently loaded vehicle.\u003c\/p\u003e\u003cp\u003eA modest lift gives clearance for larger tyres and better approach and departure angles. Too much lift, or a lift without the matching parts, gives worse handling, worn joints and propshaft vibration. Our kits are the height we would run ourselves, with the parts that height actually needs, and we say plainly what changes on the road. The 90 is the short wheelbase and the one that gets used hardest off road, so the parts on it are the ones we see worn out fastest.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Defender 90, chassis code LD 90\u003c\/li\u003e\n\u003cli\u003eEngine: 200Tdi, 300Tdi, Td5, 2.4 and 2.2 Puma diesel\u003c\/li\u003e\n\u003cli\u003eProduction dates: 1983 to 2016\u003c\/li\u003e\n\u003cli\u003eQuality: Parts Only or Fitted With Alignment\u003c\/li\u003e\n\u003cli\u003ePart number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody\u003c\/li\u003e\n\u003cli\u003eThe failure this addresses: sagging rear, wallowing and bottoming out under load\u003c\/li\u003e\n\u003cli\u003eLabour time: about 5 hours, included\u003c\/li\u003e\n\u003cli\u003eCoding: none required. Fit it and drive\u003c\/li\u003e\n\u003cli\u003eAlso needed: an alignment\u003c\/li\u003e\n\u003cli\u003eTorque: factory figures\u003c\/li\u003e\n\u003cli\u003eWeight: about 64 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: two years or 24,000 miles, whichever comes first\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSprings\u003c\/li\u003e\n\u003cli\u003eDampers\u003c\/li\u003e\n\u003cli\u003eBushes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eLabour guide: about 5 hours, included. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered to you or your garage, with our fitting notes. Fitted With Alignment is fitted at our workshop with a four wheel alignment and headlamp aim afterwards, which a raised or modified vehicle needs.\u003c\/p\u003e","brand":"Solihull Spares","offers":[{"title":"Parts Only","offer_id":54809461031245,"sku":"SLS-LFT-007-PO","price":1199.0,"currency_code":"GBP","in_stock":true},{"title":"Fitted With Alignment","offer_id":54809461064013,"sku":"SLS-LFT-007-FWA","price":1624.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/6247\/2269\/files\/Defender_90_Heavy_Duty_Suspension_Package_fda0d618-9d3b-46f3-9672-39eefe6f698f.jpg?v=1790171167"},{"product_id":"defender-110-heavy-duty-suspension-package","title":"Defender 110 Heavy Duty Suspension Package","description":"\u003cp\u003eHeavy Duty Suspension Package for the Defender 110: heavy duty springs and dampers rated for a permanently loaded vehicle.\u003c\/p\u003e\u003cp\u003eA modest lift gives clearance for larger tyres and better approach and departure angles. Too much lift, or a lift without the matching parts, gives worse handling, worn joints and propshaft vibration. Our kits are the height we would run ourselves, with the parts that height actually needs, and we say plainly what changes on the road. The 110 is the working Defender: farms, estates, utilities and expeditions, usually loaded and usually towing.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Defender 110, chassis code LD 110\u003c\/li\u003e\n\u003cli\u003eEngine: 200Tdi, 300Tdi, Td5, 2.4 and 2.2 Puma diesel\u003c\/li\u003e\n\u003cli\u003eProduction dates: 1983 to 2016\u003c\/li\u003e\n\u003cli\u003eQuality: Parts Only or Fitted With Alignment\u003c\/li\u003e\n\u003cli\u003ePart number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody\u003c\/li\u003e\n\u003cli\u003eThe failure this addresses: sagging rear, wallowing and bottoming out under load\u003c\/li\u003e\n\u003cli\u003eLabour time: about 5 hours, included\u003c\/li\u003e\n\u003cli\u003eCoding: none required. Fit it and drive\u003c\/li\u003e\n\u003cli\u003eAlso needed: an alignment\u003c\/li\u003e\n\u003cli\u003eTorque: factory figures\u003c\/li\u003e\n\u003cli\u003eWeight: about 64 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: two years or 24,000 miles, whichever comes first\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSprings\u003c\/li\u003e\n\u003cli\u003eDampers\u003c\/li\u003e\n\u003cli\u003eBushes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eLabour guide: about 5 hours, included. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered to you or your garage, with our fitting notes. Fitted With Alignment is fitted at our workshop with a four wheel alignment and headlamp aim afterwards, which a raised or modified vehicle needs.\u003c\/p\u003e","brand":"Solihull Spares","offers":[{"title":"Parts Only","offer_id":54809461096781,"sku":"SLS-LFT-008-PO","price":1274.0,"currency_code":"GBP","in_stock":true},{"title":"Fitted With Alignment","offer_id":54809461129549,"sku":"SLS-LFT-008-FWA","price":1724.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/6247\/2269\/files\/Defender_110_Heavy_Duty_Suspension_Package_617afd52-59a0-4cee-89b8-db603cac764c.jpg?v=1790171168"},{"product_id":"defender-130-heavy-duty-suspension-package","title":"Defender 130 Heavy Duty Suspension Package","description":"\u003cp\u003eHeavy Duty Suspension Package for the Defender 130: heavy duty springs and dampers rated for a permanently loaded vehicle.\u003c\/p\u003e\u003cp\u003eA modest lift gives clearance for larger tyres and better approach and departure angles. Too much lift, or a lift without the matching parts, gives worse handling, worn joints and propshaft vibration. Our kits are the height we would run ourselves, with the parts that height actually needs, and we say plainly what changes on the road. The 130 is the long wheelbase crew cab and pick up, and it carries its weight on the rear axle, which changes which parts wear first.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Defender 130, chassis code LD 130\u003c\/li\u003e\n\u003cli\u003eEngine: 300Tdi, Td5, 2.4 and 2.2 Puma diesel\u003c\/li\u003e\n\u003cli\u003eProduction dates: 1984 to 2016\u003c\/li\u003e\n\u003cli\u003eQuality: Parts Only or Fitted With Alignment\u003c\/li\u003e\n\u003cli\u003ePart number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody\u003c\/li\u003e\n\u003cli\u003eThe failure this addresses: sagging rear, wallowing and bottoming out under load\u003c\/li\u003e\n\u003cli\u003eLabour time: about 5 hours, included\u003c\/li\u003e\n\u003cli\u003eCoding: none required. Fit it and drive\u003c\/li\u003e\n\u003cli\u003eAlso needed: an alignment\u003c\/li\u003e\n\u003cli\u003eTorque: factory figures\u003c\/li\u003e\n\u003cli\u003eWeight: about 64 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: two years or 24,000 miles, whichever comes first\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSprings\u003c\/li\u003e\n\u003cli\u003eDampers\u003c\/li\u003e\n\u003cli\u003eBushes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eLabour guide: about 5 hours, included. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered to you or your garage, with our fitting notes. Fitted With Alignment is fitted at our workshop with a four wheel alignment and headlamp aim afterwards, which a raised or modified vehicle needs.\u003c\/p\u003e","brand":"Solihull Spares","offers":[{"title":"Parts Only","offer_id":54809461195085,"sku":"SLS-LFT-009-PO","price":1349.0,"currency_code":"GBP","in_stock":true},{"title":"Fitted With Alignment","offer_id":54809461227853,"sku":"SLS-LFT-009-FWA","price":1824.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/6247\/2269\/files\/Defender_130_Heavy_Duty_Suspension_Package_51ab478d-10c6-46eb-9e49-a8ce6594d17d.jpg?v=1790171212"},{"product_id":"discovery-1-heavy-duty-suspension-package","title":"Discovery 1 Heavy Duty Suspension Package","description":"\u003cp\u003eHeavy Duty Suspension Package for the Discovery 1: heavy duty springs and dampers rated for a permanently loaded vehicle.\u003c\/p\u003e\u003cp\u003eA modest lift gives clearance for larger tyres and better approach and departure angles. Too much lift, or a lift without the matching parts, gives worse handling, worn joints and propshaft vibration. Our kits are the height we would run ourselves, with the parts that height actually needs, and we say plainly what changes on the road. The Discovery 1 shares its chassis design and drivetrain with the Defender and the Range Rover Classic, and it rusts in the same places.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Discovery 1, chassis code LJ\u003c\/li\u003e\n\u003cli\u003eEngine: 200Tdi and 300Tdi diesel, 3.5 and 3.9 V8\u003c\/li\u003e\n\u003cli\u003eProduction dates: 1989 to 1998\u003c\/li\u003e\n\u003cli\u003eQuality: Parts Only or Fitted With Alignment\u003c\/li\u003e\n\u003cli\u003ePart number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody\u003c\/li\u003e\n\u003cli\u003eThe failure this addresses: sagging rear, wallowing and bottoming out under load\u003c\/li\u003e\n\u003cli\u003eLabour time: about 5 hours, included\u003c\/li\u003e\n\u003cli\u003eCoding: none required. Fit it and drive\u003c\/li\u003e\n\u003cli\u003eAlso needed: an alignment\u003c\/li\u003e\n\u003cli\u003eTorque: factory figures\u003c\/li\u003e\n\u003cli\u003eWeight: about 64 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: two years or 24,000 miles, whichever comes first\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSprings\u003c\/li\u003e\n\u003cli\u003eDampers\u003c\/li\u003e\n\u003cli\u003eBushes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eLabour guide: about 5 hours, included. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered to you or your garage, with our fitting notes. Fitted With Alignment is fitted at our workshop with a four wheel alignment and headlamp aim afterwards, which a raised or modified vehicle needs.\u003c\/p\u003e","brand":"Solihull Spares","offers":[{"title":"Parts Only","offer_id":54809461260621,"sku":"SLS-LFT-010-PO","price":1149.0,"currency_code":"GBP","in_stock":true},{"title":"Fitted With Alignment","offer_id":54809461293389,"sku":"SLS-LFT-010-FWA","price":1549.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/6247\/2269\/files\/Discovery_1_Heavy_Duty_Suspension_Package_748e7cbe-e8a7-45b2-9455-c523b19061cf.jpg?v=1790171212"},{"product_id":"discovery-2-heavy-duty-suspension-package","title":"Discovery 2 Heavy Duty Suspension Package","description":"\u003cp\u003eHeavy Duty Suspension Package for the Discovery 2: heavy duty springs and dampers rated for a permanently loaded vehicle.\u003c\/p\u003e\u003cp\u003eA modest lift gives clearance for larger tyres and better approach and departure angles. Too much lift, or a lift without the matching parts, gives worse handling, worn joints and propshaft vibration. Our kits are the height we would run ourselves, with the parts that height actually needs, and we say plainly what changes on the road. The Discovery 2 is the Td5 era, with self levelling rear air on some cars and ACE active roll control on others, and both matter when you order suspension.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Discovery 2, chassis code L318\u003c\/li\u003e\n\u003cli\u003eEngine: Td5 diesel and 4.0 V8\u003c\/li\u003e\n\u003cli\u003eProduction dates: 1998 to 2004\u003c\/li\u003e\n\u003cli\u003eQuality: Parts Only or Fitted With Alignment\u003c\/li\u003e\n\u003cli\u003ePart number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody\u003c\/li\u003e\n\u003cli\u003eThe failure this addresses: sagging rear, wallowing and bottoming out under load\u003c\/li\u003e\n\u003cli\u003eLabour time: about 5 hours, included\u003c\/li\u003e\n\u003cli\u003eCoding: none required. Fit it and drive\u003c\/li\u003e\n\u003cli\u003eAlso needed: an alignment\u003c\/li\u003e\n\u003cli\u003eTorque: factory figures\u003c\/li\u003e\n\u003cli\u003eWeight: about 64 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: two years or 24,000 miles, whichever comes first\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSprings\u003c\/li\u003e\n\u003cli\u003eDampers\u003c\/li\u003e\n\u003cli\u003eBushes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eLabour guide: about 5 hours, included. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered to you or your garage, with our fitting notes. Fitted With Alignment is fitted at our workshop with a four wheel alignment and headlamp aim afterwards, which a raised or modified vehicle needs.\u003c\/p\u003e","brand":"Solihull Spares","offers":[{"title":"Parts Only","offer_id":54809461326157,"sku":"SLS-LFT-011-PO","price":1199.0,"currency_code":"GBP","in_stock":true},{"title":"Fitted With Alignment","offer_id":54809461358925,"sku":"SLS-LFT-011-FWA","price":1624.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/6247\/2269\/files\/Discovery_2_Heavy_Duty_Suspension_Package_f1e2f51e-1245-4b78-ad86-6bd6224948a9.jpg?v=1790171212"},{"product_id":"new-defender-l663-heavy-duty-suspension-package","title":"New Defender L663 Heavy Duty Suspension Package","description":"\u003cp\u003eHeavy Duty Suspension Package for the New Defender L663: heavy duty springs and dampers rated for a permanently loaded vehicle.\u003c\/p\u003e\u003cp\u003eA modest lift gives clearance for larger tyres and better approach and departure angles. Too much lift, or a lift without the matching parts, gives worse handling, worn joints and propshaft vibration. Our kits are the height we would run ourselves, with the parts that height actually needs, and we say plainly what changes on the road. The new Defender is a monocoque on air or coil springs with electronic everything, and nearly every module on it wants programming after it is fitted.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: New Defender L663, chassis code L663\u003c\/li\u003e\n\u003cli\u003eEngine: D200 D250 and D300 Ingenium six cylinder diesel, P300 and P400 petrol, P400e\u003c\/li\u003e\n\u003cli\u003eProduction dates: 2020 on\u003c\/li\u003e\n\u003cli\u003eQuality: Parts Only or Fitted With Alignment\u003c\/li\u003e\n\u003cli\u003ePart number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody\u003c\/li\u003e\n\u003cli\u003eThe failure this addresses: sagging rear, wallowing and bottoming out under load\u003c\/li\u003e\n\u003cli\u003eLabour time: about 5 hours, included\u003c\/li\u003e\n\u003cli\u003eCoding: none required. Fit it and drive\u003c\/li\u003e\n\u003cli\u003eAlso needed: an alignment\u003c\/li\u003e\n\u003cli\u003eTorque: factory figures\u003c\/li\u003e\n\u003cli\u003eWeight: about 64 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: two years or 24,000 miles, whichever comes first\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSprings\u003c\/li\u003e\n\u003cli\u003eDampers\u003c\/li\u003e\n\u003cli\u003eBushes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eLabour guide: about 5 hours, included. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered to you or your garage, with our fitting notes. Fitted With Alignment is fitted at our workshop with a four wheel alignment and headlamp aim afterwards, which a raised or modified vehicle needs.\u003c\/p\u003e","brand":"Solihull Spares","offers":[{"title":"Parts Only","offer_id":54809461621069,"sku":"SLS-LFT-012-PO","price":1449.0,"currency_code":"GBP","in_stock":true},{"title":"Fitted With Alignment","offer_id":54809461653837,"sku":"SLS-LFT-012-FWA","price":1974.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/6247\/2269\/files\/New_Defender_L663_Heavy_Duty_Suspension_Package_14748b33-cecd-4855-b744-74767c6a5651.jpg?v=1790171212"},{"product_id":"defender-90-two-inch-lift-kit","title":"Defender 90 Two Inch Lift Kit","description":"\u003cp\u003eTwo Inch Lift Kit for the Defender 90: springs, dampers and extended brake hoses for a two inch lift.\u003c\/p\u003e\u003cp\u003eA modest lift gives clearance for larger tyres and better approach and departure angles. Too much lift, or a lift without the matching parts, gives worse handling, worn joints and propshaft vibration. Our kits are the height we would run ourselves, with the parts that height actually needs, and we say plainly what changes on the road. The 90 is the short wheelbase and the one that gets used hardest off road, so the parts on it are the ones we see worn out fastest.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Defender 90, chassis code LD 90\u003c\/li\u003e\n\u003cli\u003eEngine: 200Tdi, 300Tdi, Td5, 2.4 and 2.2 Puma diesel\u003c\/li\u003e\n\u003cli\u003eProduction dates: 1983 to 2016\u003c\/li\u003e\n\u003cli\u003eQuality: Standard or Heavy Duty\u003c\/li\u003e\n\u003cli\u003ePart number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody\u003c\/li\u003e\n\u003cli\u003eThe failure this addresses: clearance\u003c\/li\u003e\n\u003cli\u003eLabour time: about 6 hours\u003c\/li\u003e\n\u003cli\u003eCoding: none required. Fit it and drive\u003c\/li\u003e\n\u003cli\u003eAlso needed: a caster correction and alignment\u003c\/li\u003e\n\u003cli\u003eTorque: factory figures\u003c\/li\u003e\n\u003cli\u003eWeight: about 64 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: two years or 24,000 miles, whichever comes first\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSprings\u003c\/li\u003e\n\u003cli\u003eDampers\u003c\/li\u003e\n\u003cli\u003eBrake hoses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eLabour guide: about 6 hours. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure. Any modification that changes ride height, tyre size, weight or appearance must be declared to your insurer before you drive the vehicle. Raised vehicles need the headlamp aim reset and a four wheel alignment, and the MOT tester will look at both.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eStandard is the standard specification, which is what most vehicles need and what we would quote unless you told us otherwise. Heavy Duty is the heavy duty specification for expedition, towing and commercial use, rated beyond the factory figures.\u003c\/p\u003e","brand":"Solihull Spares","offers":[{"title":"Standard","offer_id":54809461686605,"sku":"SLS-LFT-013-S","price":739.0,"currency_code":"GBP","in_stock":true},{"title":"Heavy Duty","offer_id":54809461719373,"sku":"SLS-LFT-013-HD","price":889.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/6247\/2269\/files\/Defender_90_Two_Inch_Lift_Kit_54df3f79-7b24-4ad4-81f9-c9ea63ea9b3c.jpg?v=1790171212"},{"product_id":"defender-110-two-inch-lift-kit","title":"Defender 110 Two Inch Lift Kit","description":"\u003cp\u003eTwo Inch Lift Kit for the Defender 110: springs, dampers and extended brake hoses for a two inch lift.\u003c\/p\u003e\u003cp\u003eA modest lift gives clearance for larger tyres and better approach and departure angles. Too much lift, or a lift without the matching parts, gives worse handling, worn joints and propshaft vibration. Our kits are the height we would run ourselves, with the parts that height actually needs, and we say plainly what changes on the road. The 110 is the working Defender: farms, estates, utilities and expeditions, usually loaded and usually towing.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Defender 110, chassis code LD 110\u003c\/li\u003e\n\u003cli\u003eEngine: 200Tdi, 300Tdi, Td5, 2.4 and 2.2 Puma diesel\u003c\/li\u003e\n\u003cli\u003eProduction dates: 1983 to 2016\u003c\/li\u003e\n\u003cli\u003eQuality: Standard or Heavy Duty\u003c\/li\u003e\n\u003cli\u003ePart number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody\u003c\/li\u003e\n\u003cli\u003eThe failure this addresses: clearance\u003c\/li\u003e\n\u003cli\u003eLabour time: about 6 hours\u003c\/li\u003e\n\u003cli\u003eCoding: none required. Fit it and drive\u003c\/li\u003e\n\u003cli\u003eAlso needed: a caster correction and alignment\u003c\/li\u003e\n\u003cli\u003eTorque: factory figures\u003c\/li\u003e\n\u003cli\u003eWeight: about 64 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: two years or 24,000 miles, whichever comes first\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSprings\u003c\/li\u003e\n\u003cli\u003eDampers\u003c\/li\u003e\n\u003cli\u003eBrake hoses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eLabour guide: about 6 hours. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure. Any modification that changes ride height, tyre size, weight or appearance must be declared to your insurer before you drive the vehicle. Raised vehicles need the headlamp aim reset and a four wheel alignment, and the MOT tester will look at both.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eStandard is the standard specification, which is what most vehicles need and what we would quote unless you told us otherwise. Heavy Duty is the heavy duty specification for expedition, towing and commercial use, rated beyond the factory figures.\u003c\/p\u003e","brand":"Solihull Spares","offers":[{"title":"Standard","offer_id":54809461752141,"sku":"SLS-LFT-014-S","price":789.0,"currency_code":"GBP","in_stock":true},{"title":"Heavy Duty","offer_id":54809461784909,"sku":"SLS-LFT-014-HD","price":949.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/6247\/2269\/files\/Defender_110_Two_Inch_Lift_Kit_3be3d88c-0378-42dc-8dc5-98ae025a6ab8.jpg?v=1790171212"},{"product_id":"defender-130-two-inch-lift-kit","title":"Defender 130 Two Inch Lift Kit","description":"\u003cp\u003eTwo Inch Lift Kit for the Defender 130: springs, dampers and extended brake hoses for a two inch lift.\u003c\/p\u003e\u003cp\u003eA modest lift gives clearance for larger tyres and better approach and departure angles. Too much lift, or a lift without the matching parts, gives worse handling, worn joints and propshaft vibration. Our kits are the height we would run ourselves, with the parts that height actually needs, and we say plainly what changes on the road. The 130 is the long wheelbase crew cab and pick up, and it carries its weight on the rear axle, which changes which parts wear first.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Defender 130, chassis code LD 130\u003c\/li\u003e\n\u003cli\u003eEngine: 300Tdi, Td5, 2.4 and 2.2 Puma diesel\u003c\/li\u003e\n\u003cli\u003eProduction dates: 1984 to 2016\u003c\/li\u003e\n\u003cli\u003eQuality: Standard or Heavy Duty\u003c\/li\u003e\n\u003cli\u003ePart number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody\u003c\/li\u003e\n\u003cli\u003eThe failure this addresses: clearance\u003c\/li\u003e\n\u003cli\u003eLabour time: about 6 hours\u003c\/li\u003e\n\u003cli\u003eCoding: none required. Fit it and drive\u003c\/li\u003e\n\u003cli\u003eAlso needed: a caster correction and alignment\u003c\/li\u003e\n\u003cli\u003eTorque: factory figures\u003c\/li\u003e\n\u003cli\u003eWeight: about 64 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: two years or 24,000 miles, whichever comes first\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSprings\u003c\/li\u003e\n\u003cli\u003eDampers\u003c\/li\u003e\n\u003cli\u003eBrake hoses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eLabour guide: about 6 hours. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure. Any modification that changes ride height, tyre size, weight or appearance must be declared to your insurer before you drive the vehicle. Raised vehicles need the headlamp aim reset and a four wheel alignment, and the MOT tester will look at both.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eStandard is the standard specification, which is what most vehicles need and what we would quote unless you told us otherwise. Heavy Duty is the heavy duty specification for expedition, towing and commercial use, rated beyond the factory figures.\u003c\/p\u003e","brand":"Solihull Spares","offers":[{"title":"Standard","offer_id":54809461817677,"sku":"SLS-LFT-015-S","price":829.0,"currency_code":"GBP","in_stock":true},{"title":"Heavy Duty","offer_id":54809461850445,"sku":"SLS-LFT-015-HD","price":999.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/6247\/2269\/files\/Defender_130_Two_Inch_Lift_Kit_25345ff9-3628-4ad0-9352-792614ab11b2.jpg?v=1790171212"},{"product_id":"discovery-1-two-inch-lift-kit","title":"Discovery 1 Two Inch Lift Kit","description":"\u003cp\u003eTwo Inch Lift Kit for the Discovery 1: springs, dampers and extended brake hoses for a two inch lift.\u003c\/p\u003e\u003cp\u003eA modest lift gives clearance for larger tyres and better approach and departure angles. Too much lift, or a lift without the matching parts, gives worse handling, worn joints and propshaft vibration. Our kits are the height we would run ourselves, with the parts that height actually needs, and we say plainly what changes on the road. The Discovery 1 shares its chassis design and drivetrain with the Defender and the Range Rover Classic, and it rusts in the same places.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Discovery 1, chassis code LJ\u003c\/li\u003e\n\u003cli\u003eEngine: 200Tdi and 300Tdi diesel, 3.5 and 3.9 V8\u003c\/li\u003e\n\u003cli\u003eProduction dates: 1989 to 1998\u003c\/li\u003e\n\u003cli\u003eQuality: Standard or Heavy Duty\u003c\/li\u003e\n\u003cli\u003ePart number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody\u003c\/li\u003e\n\u003cli\u003eThe failure this addresses: clearance\u003c\/li\u003e\n\u003cli\u003eLabour time: about 6 hours\u003c\/li\u003e\n\u003cli\u003eCoding: none required. Fit it and drive\u003c\/li\u003e\n\u003cli\u003eAlso needed: a caster correction and alignment\u003c\/li\u003e\n\u003cli\u003eTorque: factory figures\u003c\/li\u003e\n\u003cli\u003eWeight: about 64 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: two years or 24,000 miles, whichever comes first\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSprings\u003c\/li\u003e\n\u003cli\u003eDampers\u003c\/li\u003e\n\u003cli\u003eBrake hoses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eLabour guide: about 6 hours. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure. Any modification that changes ride height, tyre size, weight or appearance must be declared to your insurer before you drive the vehicle. Raised vehicles need the headlamp aim reset and a four wheel alignment, and the MOT tester will look at both.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eStandard is the standard specification, which is what most vehicles need and what we would quote unless you told us otherwise. Heavy Duty is the heavy duty specification for expedition, towing and commercial use, rated beyond the factory figures.\u003c\/p\u003e","brand":"Solihull Spares","offers":[{"title":"Standard","offer_id":54809461883213,"sku":"SLS-LFT-016-S","price":719.0,"currency_code":"GBP","in_stock":true},{"title":"Heavy Duty","offer_id":54809461915981,"sku":"SLS-LFT-016-HD","price":859.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/6247\/2269\/files\/Discovery_1_Two_Inch_Lift_Kit_ca665eed-b9a0-4644-9f4a-5cc85f7a05a5.jpg?v=1790171212"},{"product_id":"discovery-2-two-inch-lift-kit","title":"Discovery 2 Two Inch Lift Kit","description":"\u003cp\u003eTwo Inch Lift Kit for the Discovery 2: springs, dampers and extended brake hoses for a two inch lift.\u003c\/p\u003e\u003cp\u003eA modest lift gives clearance for larger tyres and better approach and departure angles. Too much lift, or a lift without the matching parts, gives worse handling, worn joints and propshaft vibration. Our kits are the height we would run ourselves, with the parts that height actually needs, and we say plainly what changes on the road. The Discovery 2 is the Td5 era, with self levelling rear air on some cars and ACE active roll control on others, and both matter when you order suspension.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Discovery 2, chassis code L318\u003c\/li\u003e\n\u003cli\u003eEngine: Td5 diesel and 4.0 V8\u003c\/li\u003e\n\u003cli\u003eProduction dates: 1998 to 2004\u003c\/li\u003e\n\u003cli\u003eQuality: Standard or Heavy Duty\u003c\/li\u003e\n\u003cli\u003ePart number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody\u003c\/li\u003e\n\u003cli\u003eThe failure this addresses: clearance\u003c\/li\u003e\n\u003cli\u003eLabour time: about 6 hours\u003c\/li\u003e\n\u003cli\u003eCoding: none required. Fit it and drive\u003c\/li\u003e\n\u003cli\u003eAlso needed: a caster correction and alignment\u003c\/li\u003e\n\u003cli\u003eTorque: factory figures\u003c\/li\u003e\n\u003cli\u003eWeight: about 64 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: two years or 24,000 miles, whichever comes first\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSprings\u003c\/li\u003e\n\u003cli\u003eDampers\u003c\/li\u003e\n\u003cli\u003eBrake hoses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eLabour guide: about 6 hours. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure. Any modification that changes ride height, tyre size, weight or appearance must be declared to your insurer before you drive the vehicle. Raised vehicles need the headlamp aim reset and a four wheel alignment, and the MOT tester will look at both.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eStandard is the standard specification, which is what most vehicles need and what we would quote unless you told us otherwise. Heavy Duty is the heavy duty specification for expedition, towing and commercial use, rated beyond the factory figures.\u003c\/p\u003e","brand":"Solihull Spares","offers":[{"title":"Standard","offer_id":54809461948749,"sku":"SLS-LFT-017-S","price":739.0,"currency_code":"GBP","in_stock":true},{"title":"Heavy Duty","offer_id":54809461981517,"sku":"SLS-LFT-017-HD","price":889.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/6247\/2269\/files\/Discovery_2_Two_Inch_Lift_Kit_8b26bb97-c79d-4a74-be53-3f2e6f81a65a.jpg?v=1790171213"},{"product_id":"defender-90-brake-upgrade-package-with-fitting","title":"Defender 90 Brake Upgrade Package with Fitting","description":"\u003cp\u003eBrake Upgrade Package with Fitting for the Defender 90: larger vented discs, multi piston calipers, braided hoses and performance pads, fitted and bled.\u003c\/p\u003e\u003cp\u003eA modest lift gives clearance for larger tyres and better approach and departure angles. Too much lift, or a lift without the matching parts, gives worse handling, worn joints and propshaft vibration. Our kits are the height we would run ourselves, with the parts that height actually needs, and we say plainly what changes on the road. The 90 is the short wheelbase and the one that gets used hardest off road, so the parts on it are the ones we see worn out fastest.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Defender 90, chassis code LD 90\u003c\/li\u003e\n\u003cli\u003eEngine: 200Tdi, 300Tdi, Td5, 2.4 and 2.2 Puma diesel\u003c\/li\u003e\n\u003cli\u003eProduction dates: 1983 to 2016\u003c\/li\u003e\n\u003cli\u003eQuality: Parts Only or Parts and Fitting\u003c\/li\u003e\n\u003cli\u003ePart number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody\u003c\/li\u003e\n\u003cli\u003eThe failure this addresses: brake fade on a heavy vehicle that tows or runs on larger tyres\u003c\/li\u003e\n\u003cli\u003eLabour time: about 5 hours, included\u003c\/li\u003e\n\u003cli\u003eCoding: none required. Fit it and drive\u003c\/li\u003e\n\u003cli\u003eAlso needed: brake fluid, included\u003c\/li\u003e\n\u003cli\u003eTorque: caliper bolts to spec\u003c\/li\u003e\n\u003cli\u003eWeight: about 38 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: two years or 24,000 miles, whichever comes first\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDiscs\u003c\/li\u003e\n\u003cli\u003eCalipers\u003c\/li\u003e\n\u003cli\u003eBraided hoses\u003c\/li\u003e\n\u003cli\u003ePads\u003c\/li\u003e\n\u003cli\u003eFluid\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eLabour guide: about 5 hours, included. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered to you or your garage, with our fitting notes. Parts and Fitting is the parts fitted at our workshop, road tested and with the warranty covering labour as well as parts.\u003c\/p\u003e","brand":"Solihull Spares","offers":[{"title":"Parts Only","offer_id":54809542820173,"sku":"SLS-LFT-018-PO","price":1299.0,"currency_code":"GBP","in_stock":true},{"title":"Parts and Fitting","offer_id":54809542852941,"sku":"SLS-LFT-018-PAF","price":1649.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/6247\/2269\/files\/Defender_90_Brake_Upgrade_Package_with_Fitting_418e8357-5848-48ed-9b4d-9a5974b9341f.jpg?v=1790171514"},{"product_id":"defender-110-brake-upgrade-package-with-fitting","title":"Defender 110 Brake Upgrade Package with Fitting","description":"\u003cp\u003eBrake Upgrade Package with Fitting for the Defender 110: larger vented discs, multi piston calipers, braided hoses and performance pads, fitted and bled.\u003c\/p\u003e\u003cp\u003eA modest lift gives clearance for larger tyres and better approach and departure angles. Too much lift, or a lift without the matching parts, gives worse handling, worn joints and propshaft vibration. Our kits are the height we would run ourselves, with the parts that height actually needs, and we say plainly what changes on the road. The 110 is the working Defender: farms, estates, utilities and expeditions, usually loaded and usually towing.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Defender 110, chassis code LD 110\u003c\/li\u003e\n\u003cli\u003eEngine: 200Tdi, 300Tdi, Td5, 2.4 and 2.2 Puma diesel\u003c\/li\u003e\n\u003cli\u003eProduction dates: 1983 to 2016\u003c\/li\u003e\n\u003cli\u003eQuality: Parts Only or Parts and Fitting\u003c\/li\u003e\n\u003cli\u003ePart number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody\u003c\/li\u003e\n\u003cli\u003eThe failure this addresses: brake fade on a heavy vehicle that tows or runs on larger tyres\u003c\/li\u003e\n\u003cli\u003eLabour time: about 5 hours, included\u003c\/li\u003e\n\u003cli\u003eCoding: none required. Fit it and drive\u003c\/li\u003e\n\u003cli\u003eAlso needed: brake fluid, included\u003c\/li\u003e\n\u003cli\u003eTorque: caliper bolts to spec\u003c\/li\u003e\n\u003cli\u003eWeight: about 38 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: two years or 24,000 miles, whichever comes first\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDiscs\u003c\/li\u003e\n\u003cli\u003eCalipers\u003c\/li\u003e\n\u003cli\u003eBraided hoses\u003c\/li\u003e\n\u003cli\u003ePads\u003c\/li\u003e\n\u003cli\u003eFluid\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eLabour guide: about 5 hours, included. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered to you or your garage, with our fitting notes. Parts and Fitting is the parts fitted at our workshop, road tested and with the warranty covering labour as well as parts.\u003c\/p\u003e","brand":"Solihull Spares","offers":[{"title":"Parts Only","offer_id":54809542984013,"sku":"SLS-LFT-019-PO","price":1374.0,"currency_code":"GBP","in_stock":true},{"title":"Parts and Fitting","offer_id":54809543016781,"sku":"SLS-LFT-019-PAF","price":1749.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/6247\/2269\/files\/Defender_110_Brake_Upgrade_Package_with_Fitting_3f826eb9-c419-4b82-a82b-b6288774e0c7.jpg?v=1790171515"},{"product_id":"defender-130-brake-upgrade-package-with-fitting","title":"Defender 130 Brake Upgrade Package with Fitting","description":"\u003cp\u003eBrake Upgrade Package with Fitting for the Defender 130: larger vented discs, multi piston calipers, braided hoses and performance pads, fitted and bled.\u003c\/p\u003e\u003cp\u003eA modest lift gives clearance for larger tyres and better approach and departure angles. Too much lift, or a lift without the matching parts, gives worse handling, worn joints and propshaft vibration. Our kits are the height we would run ourselves, with the parts that height actually needs, and we say plainly what changes on the road. The 130 is the long wheelbase crew cab and pick up, and it carries its weight on the rear axle, which changes which parts wear first.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Defender 130, chassis code LD 130\u003c\/li\u003e\n\u003cli\u003eEngine: 300Tdi, Td5, 2.4 and 2.2 Puma diesel\u003c\/li\u003e\n\u003cli\u003eProduction dates: 1984 to 2016\u003c\/li\u003e\n\u003cli\u003eQuality: Parts Only or Parts and Fitting\u003c\/li\u003e\n\u003cli\u003ePart number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody\u003c\/li\u003e\n\u003cli\u003eThe failure this addresses: brake fade on a heavy vehicle that tows or runs on larger tyres\u003c\/li\u003e\n\u003cli\u003eLabour time: about 5 hours, included\u003c\/li\u003e\n\u003cli\u003eCoding: none required. Fit it and drive\u003c\/li\u003e\n\u003cli\u003eAlso needed: brake fluid, included\u003c\/li\u003e\n\u003cli\u003eTorque: caliper bolts to spec\u003c\/li\u003e\n\u003cli\u003eWeight: about 38 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: two years or 24,000 miles, whichever comes first\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDiscs\u003c\/li\u003e\n\u003cli\u003eCalipers\u003c\/li\u003e\n\u003cli\u003eBraided hoses\u003c\/li\u003e\n\u003cli\u003ePads\u003c\/li\u003e\n\u003cli\u003eFluid\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eLabour guide: about 5 hours, included. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered to you or your garage, with our fitting notes. Parts and Fitting is the parts fitted at our workshop, road tested and with the warranty covering labour as well as parts.\u003c\/p\u003e","brand":"Solihull Spares","offers":[{"title":"Parts Only","offer_id":54809543147853,"sku":"SLS-LFT-020-PO","price":1449.0,"currency_code":"GBP","in_stock":true},{"title":"Parts and Fitting","offer_id":54809543180621,"sku":"SLS-LFT-020-PAF","price":1849.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/6247\/2269\/files\/Defender_130_Brake_Upgrade_Package_with_Fitting_9588756f-4c56-4470-9c69-15f86c069a99.jpg?v=1790171514"},{"product_id":"new-defender-l663-brake-upgrade-package-with-fitting","title":"New Defender L663 Brake Upgrade Package with Fitting","description":"\u003cp\u003eBrake Upgrade Package with Fitting for the New Defender L663: larger vented discs, multi piston calipers, braided hoses and performance pads, fitted and bled.\u003c\/p\u003e\u003cp\u003eA modest lift gives clearance for larger tyres and better approach and departure angles. Too much lift, or a lift without the matching parts, gives worse handling, worn joints and propshaft vibration. Our kits are the height we would run ourselves, with the parts that height actually needs, and we say plainly what changes on the road. The new Defender is a monocoque on air or coil springs with electronic everything, and nearly every module on it wants programming after it is fitted.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: New Defender L663, chassis code L663\u003c\/li\u003e\n\u003cli\u003eEngine: D200 D250 and D300 Ingenium six cylinder diesel, P300 and P400 petrol, P400e\u003c\/li\u003e\n\u003cli\u003eProduction dates: 2020 on\u003c\/li\u003e\n\u003cli\u003eQuality: Parts Only or Parts and Fitting\u003c\/li\u003e\n\u003cli\u003ePart number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody\u003c\/li\u003e\n\u003cli\u003eThe failure this addresses: brake fade on a heavy vehicle that tows or runs on larger tyres\u003c\/li\u003e\n\u003cli\u003eLabour time: about 5 hours, included\u003c\/li\u003e\n\u003cli\u003eCoding: none required. Fit it and drive\u003c\/li\u003e\n\u003cli\u003eAlso needed: brake fluid, included\u003c\/li\u003e\n\u003cli\u003eTorque: caliper bolts to spec\u003c\/li\u003e\n\u003cli\u003eWeight: about 38 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: two years or 24,000 miles, whichever comes first\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDiscs\u003c\/li\u003e\n\u003cli\u003eCalipers\u003c\/li\u003e\n\u003cli\u003eBraided hoses\u003c\/li\u003e\n\u003cli\u003ePads\u003c\/li\u003e\n\u003cli\u003eFluid\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eLabour guide: about 5 hours, included. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered to you or your garage, with our fitting notes. Parts and Fitting is the parts fitted at our workshop, road tested and with the warranty covering labour as well as parts.\u003c\/p\u003e","brand":"Solihull Spares","offers":[{"title":"Parts Only","offer_id":54809543311693,"sku":"SLS-LFT-021-PO","price":1574.0,"currency_code":"GBP","in_stock":true},{"title":"Parts and Fitting","offer_id":54809543344461,"sku":"SLS-LFT-021-PAF","price":2024.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/6247\/2269\/files\/New_Defender_L663_Brake_Upgrade_Package_with_Fitting_902a4e9c-3af2-458d-9c61-266ca1b468b8.jpg?v=1790171514"},{"product_id":"discovery-1-brake-upgrade-package-with-fitting","title":"Discovery 1 Brake Upgrade Package with Fitting","description":"\u003cp\u003eBrake Upgrade Package with Fitting for the Discovery 1: larger vented discs, multi piston calipers, braided hoses and performance pads, fitted and bled.\u003c\/p\u003e\u003cp\u003eA modest lift gives clearance for larger tyres and better approach and departure angles. Too much lift, or a lift without the matching parts, gives worse handling, worn joints and propshaft vibration. Our kits are the height we would run ourselves, with the parts that height actually needs, and we say plainly what changes on the road. The Discovery 1 shares its chassis design and drivetrain with the Defender and the Range Rover Classic, and it rusts in the same places.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Discovery 1, chassis code LJ\u003c\/li\u003e\n\u003cli\u003eEngine: 200Tdi and 300Tdi diesel, 3.5 and 3.9 V8\u003c\/li\u003e\n\u003cli\u003eProduction dates: 1989 to 1998\u003c\/li\u003e\n\u003cli\u003eQuality: Parts Only or Parts and Fitting\u003c\/li\u003e\n\u003cli\u003ePart number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody\u003c\/li\u003e\n\u003cli\u003eThe failure this addresses: brake fade on a heavy vehicle that tows or runs on larger tyres\u003c\/li\u003e\n\u003cli\u003eLabour time: about 5 hours, included\u003c\/li\u003e\n\u003cli\u003eCoding: none required. Fit it and drive\u003c\/li\u003e\n\u003cli\u003eAlso needed: brake fluid, included\u003c\/li\u003e\n\u003cli\u003eTorque: caliper bolts to spec\u003c\/li\u003e\n\u003cli\u003eWeight: about 38 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: two years or 24,000 miles, whichever comes first\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDiscs\u003c\/li\u003e\n\u003cli\u003eCalipers\u003c\/li\u003e\n\u003cli\u003eBraided hoses\u003c\/li\u003e\n\u003cli\u003ePads\u003c\/li\u003e\n\u003cli\u003eFluid\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eLabour guide: about 5 hours, included. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered to you or your garage, with our fitting notes. Parts and Fitting is the parts fitted at our workshop, road tested and with the warranty covering labour as well as parts.\u003c\/p\u003e","brand":"Solihull Spares","offers":[{"title":"Parts Only","offer_id":54809543704909,"sku":"SLS-LFT-022-PO","price":1249.0,"currency_code":"GBP","in_stock":true},{"title":"Parts and Fitting","offer_id":54809543737677,"sku":"SLS-LFT-022-PAF","price":1599.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/6247\/2269\/files\/Discovery_1_Brake_Upgrade_Package_with_Fitting_f3ef1acd-28c5-4627-a69f-81e7c4d652ed.jpg?v=1790171515"},{"product_id":"discovery-2-brake-upgrade-package-with-fitting","title":"Discovery 2 Brake Upgrade Package with Fitting","description":"\u003cp\u003eBrake Upgrade Package with Fitting for the Discovery 2: larger vented discs, multi piston calipers, braided hoses and performance pads, fitted and bled.\u003c\/p\u003e\u003cp\u003eA modest lift gives clearance for larger tyres and better approach and departure angles. Too much lift, or a lift without the matching parts, gives worse handling, worn joints and propshaft vibration. Our kits are the height we would run ourselves, with the parts that height actually needs, and we say plainly what changes on the road. The Discovery 2 is the Td5 era, with self levelling rear air on some cars and ACE active roll control on others, and both matter when you order suspension.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Discovery 2, chassis code L318\u003c\/li\u003e\n\u003cli\u003eEngine: Td5 diesel and 4.0 V8\u003c\/li\u003e\n\u003cli\u003eProduction dates: 1998 to 2004\u003c\/li\u003e\n\u003cli\u003eQuality: Parts Only or Parts and Fitting\u003c\/li\u003e\n\u003cli\u003ePart number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody\u003c\/li\u003e\n\u003cli\u003eThe failure this addresses: brake fade on a heavy vehicle that tows or runs on larger tyres\u003c\/li\u003e\n\u003cli\u003eLabour time: about 5 hours, included\u003c\/li\u003e\n\u003cli\u003eCoding: none required. Fit it and drive\u003c\/li\u003e\n\u003cli\u003eAlso needed: brake fluid, included\u003c\/li\u003e\n\u003cli\u003eTorque: caliper bolts to spec\u003c\/li\u003e\n\u003cli\u003eWeight: about 38 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: two years or 24,000 miles, whichever comes first\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDiscs\u003c\/li\u003e\n\u003cli\u003eCalipers\u003c\/li\u003e\n\u003cli\u003eBraided hoses\u003c\/li\u003e\n\u003cli\u003ePads\u003c\/li\u003e\n\u003cli\u003eFluid\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eLabour guide: about 5 hours, included. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered to you or your garage, with our fitting notes. Parts and Fitting is the parts fitted at our workshop, road tested and with the warranty covering labour as well as parts.\u003c\/p\u003e","brand":"Solihull Spares","offers":[{"title":"Parts Only","offer_id":54809543868749,"sku":"SLS-LFT-023-PO","price":1299.0,"currency_code":"GBP","in_stock":true},{"title":"Parts and Fitting","offer_id":54809543901517,"sku":"SLS-LFT-023-PAF","price":1649.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/6247\/2269\/files\/Discovery_2_Brake_Upgrade_Package_with_Fitting_25d1b4b2-37eb-4c9d-846b-f4f45ccf87c0.jpg?v=1790171515"},{"product_id":"discovery-3-brake-upgrade-package-with-fitting","title":"Discovery 3 Brake Upgrade Package with Fitting","description":"\u003cp\u003eBrake Upgrade Package with Fitting for the Discovery 3: larger vented discs, multi piston calipers, braided hoses and performance pads, fitted and bled.\u003c\/p\u003e\u003cp\u003eA modest lift gives clearance for larger tyres and better approach and departure angles. Too much lift, or a lift without the matching parts, gives worse handling, worn joints and propshaft vibration. Our kits are the height we would run ourselves, with the parts that height actually needs, and we say plainly what changes on the road. The Discovery 3 was the first on the integrated body frame and the first with full air suspension as standard, which is where most of its bills come from.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Discovery 3, chassis code L319\u003c\/li\u003e\n\u003cli\u003eEngine: 2.7 TDV6 diesel and 4.4 V8\u003c\/li\u003e\n\u003cli\u003eProduction dates: 2004 to 2009\u003c\/li\u003e\n\u003cli\u003eQuality: Parts Only or Parts and Fitting\u003c\/li\u003e\n\u003cli\u003ePart number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody\u003c\/li\u003e\n\u003cli\u003eThe failure this addresses: brake fade on a heavy vehicle that tows or runs on larger tyres\u003c\/li\u003e\n\u003cli\u003eLabour time: about 5 hours, included\u003c\/li\u003e\n\u003cli\u003eCoding: none required. Fit it and drive\u003c\/li\u003e\n\u003cli\u003eAlso needed: brake fluid, included\u003c\/li\u003e\n\u003cli\u003eTorque: caliper bolts to spec\u003c\/li\u003e\n\u003cli\u003eWeight: about 38 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: two years or 24,000 miles, whichever comes first\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDiscs\u003c\/li\u003e\n\u003cli\u003eCalipers\u003c\/li\u003e\n\u003cli\u003eBraided hoses\u003c\/li\u003e\n\u003cli\u003ePads\u003c\/li\u003e\n\u003cli\u003eFluid\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eLabour guide: about 5 hours, included. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered to you or your garage, with our fitting notes. Parts and Fitting is the parts fitted at our workshop, road tested and with the warranty covering labour as well as parts.\u003c\/p\u003e","brand":"Solihull Spares","offers":[{"title":"Parts Only","offer_id":54809544065357,"sku":"SLS-LFT-024-PO","price":1399.0,"currency_code":"GBP","in_stock":true},{"title":"Parts and Fitting","offer_id":54809544098125,"sku":"SLS-LFT-024-PAF","price":1799.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/6247\/2269\/files\/Discovery_3_Brake_Upgrade_Package_with_Fitting_58cd2172-5523-4452-a3eb-ffaf9914e2c7.jpg?v=1790171515"},{"product_id":"discovery-4-brake-upgrade-package-with-fitting","title":"Discovery 4 Brake Upgrade Package with Fitting","description":"\u003cp\u003eBrake Upgrade Package with Fitting for the Discovery 4: larger vented discs, multi piston calipers, braided hoses and performance pads, fitted and bled.\u003c\/p\u003e\u003cp\u003eA modest lift gives clearance for larger tyres and better approach and departure angles. Too much lift, or a lift without the matching parts, gives worse handling, worn joints and propshaft vibration. Our kits are the height we would run ourselves, with the parts that height actually needs, and we say plainly what changes on the road. The Discovery 4 is the Discovery 3 made better, but the 3.0 V6 diesel carries a crankshaft failure risk that every owner ought to know about.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Discovery 4, chassis code L319\u003c\/li\u003e\n\u003cli\u003eEngine: 3.0 TDV6 and SDV6 diesel, 5.0 V8\u003c\/li\u003e\n\u003cli\u003eProduction dates: 2009 to 2016\u003c\/li\u003e\n\u003cli\u003eQuality: Parts Only or Parts and Fitting\u003c\/li\u003e\n\u003cli\u003ePart number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody\u003c\/li\u003e\n\u003cli\u003eThe failure this addresses: brake fade on a heavy vehicle that tows or runs on larger tyres\u003c\/li\u003e\n\u003cli\u003eLabour time: about 5 hours, included\u003c\/li\u003e\n\u003cli\u003eCoding: none required. Fit it and drive\u003c\/li\u003e\n\u003cli\u003eAlso needed: brake fluid, included\u003c\/li\u003e\n\u003cli\u003eTorque: caliper bolts to spec\u003c\/li\u003e\n\u003cli\u003eWeight: about 38 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: two years or 24,000 miles, whichever comes first\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDiscs\u003c\/li\u003e\n\u003cli\u003eCalipers\u003c\/li\u003e\n\u003cli\u003eBraided hoses\u003c\/li\u003e\n\u003cli\u003ePads\u003c\/li\u003e\n\u003cli\u003eFluid\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eLabour guide: about 5 hours, included. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered to you or your garage, with our fitting notes. Parts and Fitting is the parts fitted at our workshop, road tested and with the warranty covering labour as well as parts.\u003c\/p\u003e","brand":"Solihull Spares","offers":[{"title":"Parts Only","offer_id":54809544229197,"sku":"SLS-LFT-025-PO","price":1449.0,"currency_code":"GBP","in_stock":true},{"title":"Parts and Fitting","offer_id":54809544261965,"sku":"SLS-LFT-025-PAF","price":1849.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/6247\/2269\/files\/Discovery_4_Brake_Upgrade_Package_with_Fitting_e668c8cd-251c-4d83-9628-b1e66bc1f456.jpg?v=1790171526"},{"product_id":"discovery-5-brake-upgrade-package-with-fitting","title":"Discovery 5 Brake Upgrade Package with Fitting","description":"\u003cp\u003eBrake Upgrade Package with Fitting for the Discovery 5: larger vented discs, multi piston calipers, braided hoses and performance pads, fitted and bled.\u003c\/p\u003e\u003cp\u003eA modest lift gives clearance for larger tyres and better approach and departure angles. Too much lift, or a lift without the matching parts, gives worse handling, worn joints and propshaft vibration. Our kits are the height we would run ourselves, with the parts that height actually needs, and we say plainly what changes on the road. The Discovery 5 is aluminium bodied and largely Ingenium powered, and it still runs air suspension and a two speed transfer box on most specifications.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Discovery 5, chassis code L462\u003c\/li\u003e\n\u003cli\u003eEngine: 2.0 Sd4 and Si4 Ingenium, 3.0 TDV6 and SDV6, D250 and D300\u003c\/li\u003e\n\u003cli\u003eProduction dates: 2017 on\u003c\/li\u003e\n\u003cli\u003eQuality: Parts Only or Parts and Fitting\u003c\/li\u003e\n\u003cli\u003ePart number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody\u003c\/li\u003e\n\u003cli\u003eThe failure this addresses: brake fade on a heavy vehicle that tows or runs on larger tyres\u003c\/li\u003e\n\u003cli\u003eLabour time: about 5 hours, included\u003c\/li\u003e\n\u003cli\u003eCoding: none required. Fit it and drive\u003c\/li\u003e\n\u003cli\u003eAlso needed: brake fluid, included\u003c\/li\u003e\n\u003cli\u003eTorque: caliper bolts to spec\u003c\/li\u003e\n\u003cli\u003eWeight: about 38 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: two years or 24,000 miles, whichever comes first\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDiscs\u003c\/li\u003e\n\u003cli\u003eCalipers\u003c\/li\u003e\n\u003cli\u003eBraided hoses\u003c\/li\u003e\n\u003cli\u003ePads\u003c\/li\u003e\n\u003cli\u003eFluid\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eLabour guide: about 5 hours, included. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered to you or your garage, with our fitting notes. Parts and Fitting is the parts fitted at our workshop, road tested and with the warranty covering labour as well as parts.\u003c\/p\u003e","brand":"Solihull Spares","offers":[{"title":"Parts Only","offer_id":54809544458573,"sku":"SLS-LFT-026-PO","price":1524.0,"currency_code":"GBP","in_stock":true},{"title":"Parts and Fitting","offer_id":54809544491341,"sku":"SLS-LFT-026-PAF","price":1949.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/6247\/2269\/files\/Discovery_5_Brake_Upgrade_Package_with_Fitting_7095642b-7b57-4561-9f4f-6704b7652b8b.jpg?v=1790171515"},{"product_id":"discovery-sport-brake-upgrade-package-with-fitting","title":"Discovery Sport Brake Upgrade Package with Fitting","description":"\u003cp\u003eBrake Upgrade Package with Fitting for the Discovery Sport: larger vented discs, multi piston calipers, braided hoses and performance pads, fitted and bled.\u003c\/p\u003e\u003cp\u003eA modest lift gives clearance for larger tyres and better approach and departure angles. Too much lift, or a lift without the matching parts, gives worse handling, worn joints and propshaft vibration. Our kits are the height we would run ourselves, with the parts that height actually needs, and we say plainly what changes on the road. The Discovery Sport shares its driveline with the Evoque and the Freelander 2 family, including the power transfer unit and the rear coupling.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Discovery Sport, chassis code L550\u003c\/li\u003e\n\u003cli\u003eEngine: 2.2 TD4 early, 2.0 TD4 Sd4 and Si4 Ingenium\u003c\/li\u003e\n\u003cli\u003eProduction dates: 2014 on\u003c\/li\u003e\n\u003cli\u003eQuality: Parts Only or Parts and Fitting\u003c\/li\u003e\n\u003cli\u003ePart number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody\u003c\/li\u003e\n\u003cli\u003eThe failure this addresses: brake fade on a heavy vehicle that tows or runs on larger tyres\u003c\/li\u003e\n\u003cli\u003eLabour time: about 5 hours, included\u003c\/li\u003e\n\u003cli\u003eCoding: none required. Fit it and drive\u003c\/li\u003e\n\u003cli\u003eAlso needed: brake fluid, included\u003c\/li\u003e\n\u003cli\u003eTorque: caliper bolts to spec\u003c\/li\u003e\n\u003cli\u003eWeight: about 38 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: two years or 24,000 miles, whichever comes first\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDiscs\u003c\/li\u003e\n\u003cli\u003eCalipers\u003c\/li\u003e\n\u003cli\u003eBraided hoses\u003c\/li\u003e\n\u003cli\u003ePads\u003c\/li\u003e\n\u003cli\u003eFluid\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eLabour guide: about 5 hours, included. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered to you or your garage, with our fitting notes. Parts and Fitting is the parts fitted at our workshop, road tested and with the warranty covering labour as well as parts.\u003c\/p\u003e","brand":"Solihull Spares","offers":[{"title":"Parts Only","offer_id":54809544622413,"sku":"SLS-LFT-027-PO","price":1299.0,"currency_code":"GBP","in_stock":true},{"title":"Parts and Fitting","offer_id":54809544655181,"sku":"SLS-LFT-027-PAF","price":1649.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/6247\/2269\/files\/Discovery_Sport_Brake_Upgrade_Package_with_Fitting_8ef139c7-930a-4a6f-a389-3145d2d6c46d.jpg?v=1790171515"},{"product_id":"freelander-1-brake-upgrade-package-with-fitting","title":"Freelander 1 Brake Upgrade Package with Fitting","description":"\u003cp\u003eBrake Upgrade Package with Fitting for the Freelander 1: larger vented discs, multi piston calipers, braided hoses and performance pads, fitted and bled.\u003c\/p\u003e\u003cp\u003eA modest lift gives clearance for larger tyres and better approach and departure angles. Too much lift, or a lift without the matching parts, gives worse handling, worn joints and propshaft vibration. Our kits are the height we would run ourselves, with the parts that height actually needs, and we say plainly what changes on the road. The Freelander 1 runs an IRD, a viscous coupling and a rear diff in one line, and all three live or die by whether the four tyres match.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Freelander 1, chassis code L314\u003c\/li\u003e\n\u003cli\u003eEngine: 1.8 K Series, 2.0 L Series and Td4 diesel, 2.5 KV6\u003c\/li\u003e\n\u003cli\u003eProduction dates: 1997 to 2006\u003c\/li\u003e\n\u003cli\u003eQuality: Parts Only or Parts and Fitting\u003c\/li\u003e\n\u003cli\u003ePart number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody\u003c\/li\u003e\n\u003cli\u003eThe failure this addresses: brake fade on a heavy vehicle that tows or runs on larger tyres\u003c\/li\u003e\n\u003cli\u003eLabour time: about 5 hours, included\u003c\/li\u003e\n\u003cli\u003eCoding: none required. Fit it and drive\u003c\/li\u003e\n\u003cli\u003eAlso needed: brake fluid, included\u003c\/li\u003e\n\u003cli\u003eTorque: caliper bolts to spec\u003c\/li\u003e\n\u003cli\u003eWeight: about 38 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: two years or 24,000 miles, whichever comes first\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDiscs\u003c\/li\u003e\n\u003cli\u003eCalipers\u003c\/li\u003e\n\u003cli\u003eBraided hoses\u003c\/li\u003e\n\u003cli\u003ePads\u003c\/li\u003e\n\u003cli\u003eFluid\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eLabour guide: about 5 hours, included. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered to you or your garage, with our fitting notes. Parts and Fitting is the parts fitted at our workshop, road tested and with the warranty covering labour as well as parts.\u003c\/p\u003e","brand":"Solihull Spares","offers":[{"title":"Parts Only","offer_id":54809544950093,"sku":"SLS-LFT-028-PO","price":1049.0,"currency_code":"GBP","in_stock":true},{"title":"Parts and Fitting","offer_id":54809544982861,"sku":"SLS-LFT-028-PAF","price":1349.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/6247\/2269\/files\/Freelander_1_Brake_Upgrade_Package_with_Fitting_8a7c08c1-190d-499f-9211-80f08f9ff0c2.jpg?v=1790171562"},{"product_id":"freelander-2-brake-upgrade-package-with-fitting","title":"Freelander 2 Brake Upgrade Package with Fitting","description":"\u003cp\u003eBrake Upgrade Package with Fitting for the Freelander 2: larger vented discs, multi piston calipers, braided hoses and performance pads, fitted and bled.\u003c\/p\u003e\u003cp\u003eA modest lift gives clearance for larger tyres and better approach and departure angles. Too much lift, or a lift without the matching parts, gives worse handling, worn joints and propshaft vibration. Our kits are the height we would run ourselves, with the parts that height actually needs, and we say plainly what changes on the road. The Freelander 2 is the most common vehicle through our IRD workshop by some distance, because its power transfer unit and rear coupling are both known weak points.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Freelander 2, chassis code L359\u003c\/li\u003e\n\u003cli\u003eEngine: 2.2 TD4 eD4 and SD4 diesel, 3.2 i6 petrol\u003c\/li\u003e\n\u003cli\u003eProduction dates: 2006 to 2014\u003c\/li\u003e\n\u003cli\u003eQuality: Parts Only or Parts and Fitting\u003c\/li\u003e\n\u003cli\u003ePart number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody\u003c\/li\u003e\n\u003cli\u003eThe failure this addresses: brake fade on a heavy vehicle that tows or runs on larger tyres\u003c\/li\u003e\n\u003cli\u003eLabour time: about 5 hours, included\u003c\/li\u003e\n\u003cli\u003eCoding: none required. Fit it and drive\u003c\/li\u003e\n\u003cli\u003eAlso needed: brake fluid, included\u003c\/li\u003e\n\u003cli\u003eTorque: caliper bolts to spec\u003c\/li\u003e\n\u003cli\u003eWeight: about 38 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: two years or 24,000 miles, whichever comes first\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDiscs\u003c\/li\u003e\n\u003cli\u003eCalipers\u003c\/li\u003e\n\u003cli\u003eBraided hoses\u003c\/li\u003e\n\u003cli\u003ePads\u003c\/li\u003e\n\u003cli\u003eFluid\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eLabour guide: about 5 hours, included. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered to you or your garage, with our fitting notes. Parts and Fitting is the parts fitted at our workshop, road tested and with the warranty covering labour as well as parts.\u003c\/p\u003e","brand":"Solihull Spares","offers":[{"title":"Parts Only","offer_id":54809545146701,"sku":"SLS-LFT-029-PO","price":1224.0,"currency_code":"GBP","in_stock":true},{"title":"Parts and Fitting","offer_id":54809545179469,"sku":"SLS-LFT-029-PAF","price":1549.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/6247\/2269\/files\/Freelander_2_Brake_Upgrade_Package_with_Fitting_6e90af51-9502-4af1-9d3a-e7f6e07f9e11.jpg?v=1790171562"},{"product_id":"range-rover-l322-brake-upgrade-package-with-fitting","title":"Range Rover L322 Brake Upgrade Package with Fitting","description":"\u003cp\u003eBrake Upgrade Package with Fitting for the Range Rover L322: larger vented discs, multi piston calipers, braided hoses and performance pads, fitted and bled.\u003c\/p\u003e\u003cp\u003eA modest lift gives clearance for larger tyres and better approach and departure angles. Too much lift, or a lift without the matching parts, gives worse handling, worn joints and propshaft vibration. Our kits are the height we would run ourselves, with the parts that height actually needs, and we say plainly what changes on the road. The L322 is the Range Rover that most people can now afford to buy and not all can afford to run, which is exactly why honest parts prices matter on it.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Range Rover L322, chassis code L322\u003c\/li\u003e\n\u003cli\u003eEngine: Td6, 3.6 and 4.4 TDV8 diesel, 4.4 and 4.2 V8, 5.0 V8\u003c\/li\u003e\n\u003cli\u003eProduction dates: 2002 to 2012\u003c\/li\u003e\n\u003cli\u003eQuality: Parts Only or Parts and Fitting\u003c\/li\u003e\n\u003cli\u003ePart number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody\u003c\/li\u003e\n\u003cli\u003eThe failure this addresses: brake fade on a heavy vehicle that tows or runs on larger tyres\u003c\/li\u003e\n\u003cli\u003eLabour time: about 5 hours, included\u003c\/li\u003e\n\u003cli\u003eCoding: none required. Fit it and drive\u003c\/li\u003e\n\u003cli\u003eAlso needed: brake fluid, included\u003c\/li\u003e\n\u003cli\u003eTorque: caliper bolts to spec\u003c\/li\u003e\n\u003cli\u003eWeight: about 38 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: two years or 24,000 miles, whichever comes first\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDiscs\u003c\/li\u003e\n\u003cli\u003eCalipers\u003c\/li\u003e\n\u003cli\u003eBraided hoses\u003c\/li\u003e\n\u003cli\u003ePads\u003c\/li\u003e\n\u003cli\u003eFluid\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eLabour guide: about 5 hours, included. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered to you or your garage, with our fitting notes. Parts and Fitting is the parts fitted at our workshop, road tested and with the warranty covering labour as well as parts.\u003c\/p\u003e","brand":"Solihull Spares","offers":[{"title":"Parts Only","offer_id":54809545310541,"sku":"SLS-LFT-030-PO","price":1474.0,"currency_code":"GBP","in_stock":true},{"title":"Parts and Fitting","offer_id":54809545343309,"sku":"SLS-LFT-030-PAF","price":1899.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/6247\/2269\/files\/Range_Rover_L322_Brake_Upgrade_Package_with_Fitting_19e1c113-5e9a-4da9-844c-bf0c0c8c6c07.jpg?v=1790171562"},{"product_id":"range-rover-l405-brake-upgrade-package-with-fitting","title":"Range Rover L405 Brake Upgrade Package with Fitting","description":"\u003cp\u003eBrake Upgrade Package with Fitting for the Range Rover L405: larger vented discs, multi piston calipers, braided hoses and performance pads, fitted and bled.\u003c\/p\u003e\u003cp\u003eA modest lift gives clearance for larger tyres and better approach and departure angles. Too much lift, or a lift without the matching parts, gives worse handling, worn joints and propshaft vibration. Our kits are the height we would run ourselves, with the parts that height actually needs, and we say plainly what changes on the road. The L405 is aluminium bodied with four corner air suspension and adaptive dampers, and its parts are dearer than the earlier cars for good reasons.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Range Rover L405, chassis code L405\u003c\/li\u003e\n\u003cli\u003eEngine: 3.0 TDV6 and SDV6, 4.4 SDV8 diesel, 5.0 V8, P400e\u003c\/li\u003e\n\u003cli\u003eProduction dates: 2012 to 2021\u003c\/li\u003e\n\u003cli\u003eQuality: Parts Only or Parts and Fitting\u003c\/li\u003e\n\u003cli\u003ePart number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody\u003c\/li\u003e\n\u003cli\u003eThe failure this addresses: brake fade on a heavy vehicle that tows or runs on larger tyres\u003c\/li\u003e\n\u003cli\u003eLabour time: about 5 hours, included\u003c\/li\u003e\n\u003cli\u003eCoding: none required. Fit it and drive\u003c\/li\u003e\n\u003cli\u003eAlso needed: brake fluid, included\u003c\/li\u003e\n\u003cli\u003eTorque: caliper bolts to spec\u003c\/li\u003e\n\u003cli\u003eWeight: about 38 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: two years or 24,000 miles, whichever comes first\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDiscs\u003c\/li\u003e\n\u003cli\u003eCalipers\u003c\/li\u003e\n\u003cli\u003eBraided hoses\u003c\/li\u003e\n\u003cli\u003ePads\u003c\/li\u003e\n\u003cli\u003eFluid\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eLabour guide: about 5 hours, included. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered to you or your garage, with our fitting notes. Parts and Fitting is the parts fitted at our workshop, road tested and with the warranty covering labour as well as parts.\u003c\/p\u003e","brand":"Solihull Spares","offers":[{"title":"Parts Only","offer_id":54809545474381,"sku":"SLS-LFT-031-PO","price":1599.0,"currency_code":"GBP","in_stock":true},{"title":"Parts and Fitting","offer_id":54809545507149,"sku":"SLS-LFT-031-PAF","price":2049.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/6247\/2269\/files\/Range_Rover_L405_Brake_Upgrade_Package_with_Fitting_955c614a-398e-4943-97fb-794adda9cb23.jpg?v=1790171562"},{"product_id":"range-rover-sport-l320-brake-upgrade-package-with-fitting","title":"Range Rover Sport L320 Brake Upgrade Package with Fitting","description":"\u003cp\u003eBrake Upgrade Package with Fitting for the Range Rover Sport L320: larger vented discs, multi piston calipers, braided hoses and performance pads, fitted and bled.\u003c\/p\u003e\u003cp\u003eA modest lift gives clearance for larger tyres and better approach and departure angles. Too much lift, or a lift without the matching parts, gives worse handling, worn joints and propshaft vibration. Our kits are the height we would run ourselves, with the parts that height actually needs, and we say plainly what changes on the road. The Sport L320 sits on the Discovery 3 and 4 frame with the same air suspension, the same transfer box and the same diesel engines.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Range Rover Sport L320, chassis code L320\u003c\/li\u003e\n\u003cli\u003eEngine: 2.7 and 3.0 TDV6, 3.0 SDV6, 3.6 TDV8 diesel, 4.2 and 5.0 V8\u003c\/li\u003e\n\u003cli\u003eProduction dates: 2005 to 2013\u003c\/li\u003e\n\u003cli\u003eQuality: Parts Only or Parts and Fitting\u003c\/li\u003e\n\u003cli\u003ePart number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody\u003c\/li\u003e\n\u003cli\u003eThe failure this addresses: brake fade on a heavy vehicle that tows or runs on larger tyres\u003c\/li\u003e\n\u003cli\u003eLabour time: about 5 hours, included\u003c\/li\u003e\n\u003cli\u003eCoding: none required. Fit it and drive\u003c\/li\u003e\n\u003cli\u003eAlso needed: brake fluid, included\u003c\/li\u003e\n\u003cli\u003eTorque: caliper bolts to spec\u003c\/li\u003e\n\u003cli\u003eWeight: about 38 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: two years or 24,000 miles, whichever comes first\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDiscs\u003c\/li\u003e\n\u003cli\u003eCalipers\u003c\/li\u003e\n\u003cli\u003eBraided hoses\u003c\/li\u003e\n\u003cli\u003ePads\u003c\/li\u003e\n\u003cli\u003eFluid\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eLabour guide: about 5 hours, included. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered to you or your garage, with our fitting notes. Parts and Fitting is the parts fitted at our workshop, road tested and with the warranty covering labour as well as parts.\u003c\/p\u003e","brand":"Solihull Spares","offers":[{"title":"Parts Only","offer_id":54809545605453,"sku":"SLS-LFT-032-PO","price":1399.0,"currency_code":"GBP","in_stock":true},{"title":"Parts and Fitting","offer_id":54809545638221,"sku":"SLS-LFT-032-PAF","price":1799.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/6247\/2269\/files\/Range_Rover_Sport_L320_Brake_Upgrade_Package_with_Fitting_e821cee8-d815-4941-abe8-aade1451f6c1.jpg?v=1790171563"},{"product_id":"range-rover-sport-l494-brake-upgrade-package-with-fitting","title":"Range Rover Sport L494 Brake Upgrade Package with Fitting","description":"\u003cp\u003eBrake Upgrade Package with Fitting for the Range Rover Sport L494: larger vented discs, multi piston calipers, braided hoses and performance pads, fitted and bled.\u003c\/p\u003e\u003cp\u003eA modest lift gives clearance for larger tyres and better approach and departure angles. Too much lift, or a lift without the matching parts, gives worse handling, worn joints and propshaft vibration. Our kits are the height we would run ourselves, with the parts that height actually needs, and we say plainly what changes on the road. The Sport L494 is the aluminium Sport, sharing most of its hardware with the L405 in a shorter body.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Range Rover Sport L494, chassis code L494\u003c\/li\u003e\n\u003cli\u003eEngine: 3.0 TDV6 and SDV6, 4.4 SDV8 diesel, 5.0 V8, P400e\u003c\/li\u003e\n\u003cli\u003eProduction dates: 2013 to 2022\u003c\/li\u003e\n\u003cli\u003eQuality: Parts Only or Parts and Fitting\u003c\/li\u003e\n\u003cli\u003ePart number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody\u003c\/li\u003e\n\u003cli\u003eThe failure this addresses: brake fade on a heavy vehicle that tows or runs on larger tyres\u003c\/li\u003e\n\u003cli\u003eLabour time: about 5 hours, included\u003c\/li\u003e\n\u003cli\u003eCoding: none required. Fit it and drive\u003c\/li\u003e\n\u003cli\u003eAlso needed: brake fluid, included\u003c\/li\u003e\n\u003cli\u003eTorque: caliper bolts to spec\u003c\/li\u003e\n\u003cli\u003eWeight: about 38 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: two years or 24,000 miles, whichever comes first\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDiscs\u003c\/li\u003e\n\u003cli\u003eCalipers\u003c\/li\u003e\n\u003cli\u003eBraided hoses\u003c\/li\u003e\n\u003cli\u003ePads\u003c\/li\u003e\n\u003cli\u003eFluid\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eLabour guide: about 5 hours, included. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered to you or your garage, with our fitting notes. Parts and Fitting is the parts fitted at our workshop, road tested and with the warranty covering labour as well as parts.\u003c\/p\u003e","brand":"Solihull Spares","offers":[{"title":"Parts Only","offer_id":54809545834829,"sku":"SLS-LFT-033-PO","price":1549.0,"currency_code":"GBP","in_stock":true},{"title":"Parts and Fitting","offer_id":54809545867597,"sku":"SLS-LFT-033-PAF","price":1999.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/6247\/2269\/files\/Range_Rover_Sport_L494_Brake_Upgrade_Package_with_Fitting_d88a16c6-01da-48a0-9fdd-74a9c1142ba7.jpg?v=1790171562"},{"product_id":"range-rover-evoque-brake-upgrade-package-with-fitting","title":"Range Rover Evoque Brake Upgrade Package with Fitting","description":"\u003cp\u003eBrake Upgrade Package with Fitting for the Range Rover Evoque: larger vented discs, multi piston calipers, braided hoses and performance pads, fitted and bled.\u003c\/p\u003e\u003cp\u003eA modest lift gives clearance for larger tyres and better approach and departure angles. Too much lift, or a lift without the matching parts, gives worse handling, worn joints and propshaft vibration. Our kits are the height we would run ourselves, with the parts that height actually needs, and we say plainly what changes on the road. The Evoque shares its driveline with the Freelander 2, so the power transfer unit and rear coupling faults are the same ones on a smarter car.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Range Rover Evoque, chassis code L538\u003c\/li\u003e\n\u003cli\u003eEngine: 2.2 TD4 eD4 and SD4 diesel, 2.0 TD4 Ingenium, 2.0 Si4 petrol\u003c\/li\u003e\n\u003cli\u003eProduction dates: 2011 to 2018\u003c\/li\u003e\n\u003cli\u003eQuality: Parts Only or Parts and Fitting\u003c\/li\u003e\n\u003cli\u003ePart number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody\u003c\/li\u003e\n\u003cli\u003eThe failure this addresses: brake fade on a heavy vehicle that tows or runs on larger tyres\u003c\/li\u003e\n\u003cli\u003eLabour time: about 5 hours, included\u003c\/li\u003e\n\u003cli\u003eCoding: none required. Fit it and drive\u003c\/li\u003e\n\u003cli\u003eAlso needed: brake fluid, included\u003c\/li\u003e\n\u003cli\u003eTorque: caliper bolts to spec\u003c\/li\u003e\n\u003cli\u003eWeight: about 38 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: two years or 24,000 miles, whichever comes first\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDiscs\u003c\/li\u003e\n\u003cli\u003eCalipers\u003c\/li\u003e\n\u003cli\u003eBraided hoses\u003c\/li\u003e\n\u003cli\u003ePads\u003c\/li\u003e\n\u003cli\u003eFluid\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eLabour guide: about 5 hours, included. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered to you or your garage, with our fitting notes. Parts and Fitting is the parts fitted at our workshop, road tested and with the warranty covering labour as well as parts.\u003c\/p\u003e","brand":"Solihull Spares","offers":[{"title":"Parts Only","offer_id":54809546457421,"sku":"SLS-LFT-034-PO","price":1274.0,"currency_code":"GBP","in_stock":true},{"title":"Parts and Fitting","offer_id":54809546490189,"sku":"SLS-LFT-034-PAF","price":1624.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/6247\/2269\/files\/Range_Rover_Evoque_Brake_Upgrade_Package_with_Fitting_49a90f06-b69d-41d2-ac3c-2d5375e43f0a.jpg?v=1790171563"},{"product_id":"defender-90-suspension-refresh-package-with-fitting","title":"Defender 90 Suspension Refresh Package with Fitting","description":"\u003cp\u003eSuspension Refresh Package with Fitting for the Defender 90: dampers, bushes, ball joints and anti roll bar links replaced at once.\u003c\/p\u003e\u003cp\u003eA modest lift gives clearance for larger tyres and better approach and departure angles. Too much lift, or a lift without the matching parts, gives worse handling, worn joints and propshaft vibration. Our kits are the height we would run ourselves, with the parts that height actually needs, and we say plainly what changes on the road. The 90 is the short wheelbase and the one that gets used hardest off road, so the parts on it are the ones we see worn out fastest.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Defender 90, chassis code LD 90\u003c\/li\u003e\n\u003cli\u003eEngine: 200Tdi, 300Tdi, Td5, 2.4 and 2.2 Puma diesel\u003c\/li\u003e\n\u003cli\u003eProduction dates: 1983 to 2016\u003c\/li\u003e\n\u003cli\u003eQuality: Parts Only or Fitted With Alignment\u003c\/li\u003e\n\u003cli\u003ePart number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody\u003c\/li\u003e\n\u003cli\u003eThe failure this addresses: tired suspension: wander, knocks over bumps and uneven tyre wear\u003c\/li\u003e\n\u003cli\u003eLabour time: about 7 hours, included\u003c\/li\u003e\n\u003cli\u003eCoding: none required. Fit it and drive\u003c\/li\u003e\n\u003cli\u003eAlso needed: an alignment, included on the fitted option\u003c\/li\u003e\n\u003cli\u003eTorque: factory figures\u003c\/li\u003e\n\u003cli\u003eWeight: about 46 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: two years or 24,000 miles, whichever comes first\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDampers\u003c\/li\u003e\n\u003cli\u003eBushes\u003c\/li\u003e\n\u003cli\u003eBall joints\u003c\/li\u003e\n\u003cli\u003eDrop links\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eLabour guide: about 7 hours, included. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered to you or your garage, with our fitting notes. Fitted With Alignment is fitted at our workshop with a four wheel alignment and headlamp aim afterwards, which a raised or modified vehicle needs.\u003c\/p\u003e","brand":"Solihull Spares","offers":[{"title":"Parts Only","offer_id":54809546555725,"sku":"SLS-LFT-035-PO","price":1299.0,"currency_code":"GBP","in_stock":true},{"title":"Fitted With Alignment","offer_id":54809546588493,"sku":"SLS-LFT-035-FWA","price":1749.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/6247\/2269\/files\/Defender_90_Suspension_Refresh_Package_with_Fitting_7ac321e5-ad40-43a8-8b67-0b18e0f6e833.jpg?v=1790171563"},{"product_id":"defender-110-suspension-refresh-package-with-fitting","title":"Defender 110 Suspension Refresh Package with Fitting","description":"\u003cp\u003eSuspension Refresh Package with Fitting for the Defender 110: dampers, bushes, ball joints and anti roll bar links replaced at once.\u003c\/p\u003e\u003cp\u003eA modest lift gives clearance for larger tyres and better approach and departure angles. Too much lift, or a lift without the matching parts, gives worse handling, worn joints and propshaft vibration. Our kits are the height we would run ourselves, with the parts that height actually needs, and we say plainly what changes on the road. The 110 is the working Defender: farms, estates, utilities and expeditions, usually loaded and usually towing.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Defender 110, chassis code LD 110\u003c\/li\u003e\n\u003cli\u003eEngine: 200Tdi, 300Tdi, Td5, 2.4 and 2.2 Puma diesel\u003c\/li\u003e\n\u003cli\u003eProduction dates: 1983 to 2016\u003c\/li\u003e\n\u003cli\u003eQuality: Parts Only or Fitted With Alignment\u003c\/li\u003e\n\u003cli\u003ePart number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody\u003c\/li\u003e\n\u003cli\u003eThe failure this addresses: tired suspension: wander, knocks over bumps and uneven tyre wear\u003c\/li\u003e\n\u003cli\u003eLabour time: about 7 hours, included\u003c\/li\u003e\n\u003cli\u003eCoding: none required. Fit it and drive\u003c\/li\u003e\n\u003cli\u003eAlso needed: an alignment, included on the fitted option\u003c\/li\u003e\n\u003cli\u003eTorque: factory figures\u003c\/li\u003e\n\u003cli\u003eWeight: about 46 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: two years or 24,000 miles, whichever comes first\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDampers\u003c\/li\u003e\n\u003cli\u003eBushes\u003c\/li\u003e\n\u003cli\u003eBall joints\u003c\/li\u003e\n\u003cli\u003eDrop links\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eLabour guide: about 7 hours, included. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered to you or your garage, with our fitting notes. Fitted With Alignment is fitted at our workshop with a four wheel alignment and headlamp aim afterwards, which a raised or modified vehicle needs.\u003c\/p\u003e","brand":"Solihull Spares","offers":[{"title":"Parts Only","offer_id":54809546654029,"sku":"SLS-LFT-036-PO","price":1374.0,"currency_code":"GBP","in_stock":true},{"title":"Fitted With Alignment","offer_id":54809546686797,"sku":"SLS-LFT-036-FWA","price":1874.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/6247\/2269\/files\/Defender_110_Suspension_Refresh_Package_with_Fitting_33021dc0-48ad-4a2b-8b33-2b7f29069f78.jpg?v=1790171563"},{"product_id":"defender-130-suspension-refresh-package-with-fitting","title":"Defender 130 Suspension Refresh Package with Fitting","description":"\u003cp\u003eSuspension Refresh Package with Fitting for the Defender 130: dampers, bushes, ball joints and anti roll bar links replaced at once.\u003c\/p\u003e\u003cp\u003eA modest lift gives clearance for larger tyres and better approach and departure angles. Too much lift, or a lift without the matching parts, gives worse handling, worn joints and propshaft vibration. Our kits are the height we would run ourselves, with the parts that height actually needs, and we say plainly what changes on the road. The 130 is the long wheelbase crew cab and pick up, and it carries its weight on the rear axle, which changes which parts wear first.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Defender 130, chassis code LD 130\u003c\/li\u003e\n\u003cli\u003eEngine: 300Tdi, Td5, 2.4 and 2.2 Puma diesel\u003c\/li\u003e\n\u003cli\u003eProduction dates: 1984 to 2016\u003c\/li\u003e\n\u003cli\u003eQuality: Parts Only or Fitted With Alignment\u003c\/li\u003e\n\u003cli\u003ePart number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody\u003c\/li\u003e\n\u003cli\u003eThe failure this addresses: tired suspension: wander, knocks over bumps and uneven tyre wear\u003c\/li\u003e\n\u003cli\u003eLabour time: about 7 hours, included\u003c\/li\u003e\n\u003cli\u003eCoding: none required. Fit it and drive\u003c\/li\u003e\n\u003cli\u003eAlso needed: an alignment, included on the fitted option\u003c\/li\u003e\n\u003cli\u003eTorque: factory figures\u003c\/li\u003e\n\u003cli\u003eWeight: about 46 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: two years or 24,000 miles, whichever comes first\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDampers\u003c\/li\u003e\n\u003cli\u003eBushes\u003c\/li\u003e\n\u003cli\u003eBall joints\u003c\/li\u003e\n\u003cli\u003eDrop links\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eLabour guide: about 7 hours, included. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered to you or your garage, with our fitting notes. Fitted With Alignment is fitted at our workshop with a four wheel alignment and headlamp aim afterwards, which a raised or modified vehicle needs.\u003c\/p\u003e","brand":"Solihull Spares","offers":[{"title":"Parts Only","offer_id":54809546752333,"sku":"SLS-LFT-037-PO","price":1449.0,"currency_code":"GBP","in_stock":true},{"title":"Fitted With Alignment","offer_id":54809546785101,"sku":"SLS-LFT-037-FWA","price":1974.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/6247\/2269\/files\/Defender_130_Suspension_Refresh_Package_with_Fitting_d3ea3b56-14f6-4734-85cb-df4534bc220c.jpg?v=1790171563"},{"product_id":"new-defender-l663-suspension-refresh-package-with-fitting","title":"New Defender L663 Suspension Refresh Package with Fitting","description":"\u003cp\u003eSuspension Refresh Package with Fitting for the New Defender L663: dampers, bushes, ball joints and anti roll bar links replaced at once.\u003c\/p\u003e\u003cp\u003eA modest lift gives clearance for larger tyres and better approach and departure angles. Too much lift, or a lift without the matching parts, gives worse handling, worn joints and propshaft vibration. Our kits are the height we would run ourselves, with the parts that height actually needs, and we say plainly what changes on the road. The new Defender is a monocoque on air or coil springs with electronic everything, and nearly every module on it wants programming after it is fitted.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: New Defender L663, chassis code L663\u003c\/li\u003e\n\u003cli\u003eEngine: D200 D250 and D300 Ingenium six cylinder diesel, P300 and P400 petrol, P400e\u003c\/li\u003e\n\u003cli\u003eProduction dates: 2020 on\u003c\/li\u003e\n\u003cli\u003eQuality: Parts Only or Fitted With Alignment\u003c\/li\u003e\n\u003cli\u003ePart number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody\u003c\/li\u003e\n\u003cli\u003eThe failure this addresses: tired suspension: wander, knocks over bumps and uneven tyre wear\u003c\/li\u003e\n\u003cli\u003eLabour time: about 7 hours, included\u003c\/li\u003e\n\u003cli\u003eCoding: none required. Fit it and drive\u003c\/li\u003e\n\u003cli\u003eAlso needed: an alignment, included on the fitted option\u003c\/li\u003e\n\u003cli\u003eTorque: factory figures\u003c\/li\u003e\n\u003cli\u003eWeight: about 46 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: two years or 24,000 miles, whichever comes first\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDampers\u003c\/li\u003e\n\u003cli\u003eBushes\u003c\/li\u003e\n\u003cli\u003eBall joints\u003c\/li\u003e\n\u003cli\u003eDrop links\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eLabour guide: about 7 hours, included. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered to you or your garage, with our fitting notes. Fitted With Alignment is fitted at our workshop with a four wheel alignment and headlamp aim afterwards, which a raised or modified vehicle needs.\u003c\/p\u003e","brand":"Solihull Spares","offers":[{"title":"Parts Only","offer_id":54809546817869,"sku":"SLS-LFT-038-PO","price":1574.0,"currency_code":"GBP","in_stock":true},{"title":"Fitted With Alignment","offer_id":54809546850637,"sku":"SLS-LFT-038-FWA","price":2149.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/6247\/2269\/files\/New_Defender_L663_Suspension_Refresh_Package_with_Fitting_a8d1f114-fdbd-4309-b919-c0355ef67cc3.jpg?v=1790171563"},{"product_id":"discovery-1-suspension-refresh-package-with-fitting","title":"Discovery 1 Suspension Refresh Package with Fitting","description":"\u003cp\u003eSuspension Refresh Package with Fitting for the Discovery 1: dampers, bushes, ball joints and anti roll bar links replaced at once.\u003c\/p\u003e\u003cp\u003eA modest lift gives clearance for larger tyres and better approach and departure angles. Too much lift, or a lift without the matching parts, gives worse handling, worn joints and propshaft vibration. Our kits are the height we would run ourselves, with the parts that height actually needs, and we say plainly what changes on the road. The Discovery 1 shares its chassis design and drivetrain with the Defender and the Range Rover Classic, and it rusts in the same places.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Discovery 1, chassis code LJ\u003c\/li\u003e\n\u003cli\u003eEngine: 200Tdi and 300Tdi diesel, 3.5 and 3.9 V8\u003c\/li\u003e\n\u003cli\u003eProduction dates: 1989 to 1998\u003c\/li\u003e\n\u003cli\u003eQuality: Parts Only or Fitted With Alignment\u003c\/li\u003e\n\u003cli\u003ePart number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody\u003c\/li\u003e\n\u003cli\u003eThe failure this addresses: tired suspension: wander, knocks over bumps and uneven tyre wear\u003c\/li\u003e\n\u003cli\u003eLabour time: about 7 hours, included\u003c\/li\u003e\n\u003cli\u003eCoding: none required. Fit it and drive\u003c\/li\u003e\n\u003cli\u003eAlso needed: an alignment, included on the fitted option\u003c\/li\u003e\n\u003cli\u003eTorque: factory figures\u003c\/li\u003e\n\u003cli\u003eWeight: about 46 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: two years or 24,000 miles, whichever comes first\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDampers\u003c\/li\u003e\n\u003cli\u003eBushes\u003c\/li\u003e\n\u003cli\u003eBall joints\u003c\/li\u003e\n\u003cli\u003eDrop links\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eLabour guide: about 7 hours, included. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered to you or your garage, with our fitting notes. Fitted With Alignment is fitted at our workshop with a four wheel alignment and headlamp aim afterwards, which a raised or modified vehicle needs.\u003c\/p\u003e","brand":"Solihull Spares","offers":[{"title":"Parts Only","offer_id":54809546916173,"sku":"SLS-LFT-039-PO","price":1249.0,"currency_code":"GBP","in_stock":true},{"title":"Fitted With Alignment","offer_id":54809546948941,"sku":"SLS-LFT-039-FWA","price":1699.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/6247\/2269\/files\/Discovery_1_Suspension_Refresh_Package_with_Fitting_b21e81cd-e8e2-4425-b659-e18bdb25b751.jpg?v=1790171563"},{"product_id":"discovery-2-suspension-refresh-package-with-fitting","title":"Discovery 2 Suspension Refresh Package with Fitting","description":"\u003cp\u003eSuspension Refresh Package with Fitting for the Discovery 2: dampers, bushes, ball joints and anti roll bar links replaced at once.\u003c\/p\u003e\u003cp\u003eA modest lift gives clearance for larger tyres and better approach and departure angles. Too much lift, or a lift without the matching parts, gives worse handling, worn joints and propshaft vibration. Our kits are the height we would run ourselves, with the parts that height actually needs, and we say plainly what changes on the road. The Discovery 2 is the Td5 era, with self levelling rear air on some cars and ACE active roll control on others, and both matter when you order suspension.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Discovery 2, chassis code L318\u003c\/li\u003e\n\u003cli\u003eEngine: Td5 diesel and 4.0 V8\u003c\/li\u003e\n\u003cli\u003eProduction dates: 1998 to 2004\u003c\/li\u003e\n\u003cli\u003eQuality: Parts Only or Fitted With Alignment\u003c\/li\u003e\n\u003cli\u003ePart number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody\u003c\/li\u003e\n\u003cli\u003eThe failure this addresses: tired suspension: wander, knocks over bumps and uneven tyre wear\u003c\/li\u003e\n\u003cli\u003eLabour time: about 7 hours, included\u003c\/li\u003e\n\u003cli\u003eCoding: none required. Fit it and drive\u003c\/li\u003e\n\u003cli\u003eAlso needed: an alignment, included on the fitted option\u003c\/li\u003e\n\u003cli\u003eTorque: factory figures\u003c\/li\u003e\n\u003cli\u003eWeight: about 46 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: two years or 24,000 miles, whichever comes first\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDampers\u003c\/li\u003e\n\u003cli\u003eBushes\u003c\/li\u003e\n\u003cli\u003eBall joints\u003c\/li\u003e\n\u003cli\u003eDrop links\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eLabour guide: about 7 hours, included. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered to you or your garage, with our fitting notes. Fitted With Alignment is fitted at our workshop with a four wheel alignment and headlamp aim afterwards, which a raised or modified vehicle needs.\u003c\/p\u003e","brand":"Solihull Spares","offers":[{"title":"Parts Only","offer_id":54809547112781,"sku":"SLS-LFT-040-PO","price":1299.0,"currency_code":"GBP","in_stock":true},{"title":"Fitted With Alignment","offer_id":54809547145549,"sku":"SLS-LFT-040-FWA","price":1749.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/6247\/2269\/files\/Discovery_2_Suspension_Refresh_Package_with_Fitting_1171b33c-ff36-469f-9a40-0c77aeacfa60.jpg?v=1790171563"},{"product_id":"discovery-3-suspension-refresh-package-with-fitting","title":"Discovery 3 Suspension Refresh Package with Fitting","description":"\u003cp\u003eSuspension Refresh Package with Fitting for the Discovery 3: dampers, bushes, ball joints and anti roll bar links replaced at once.\u003c\/p\u003e\u003cp\u003eA modest lift gives clearance for larger tyres and better approach and departure angles. Too much lift, or a lift without the matching parts, gives worse handling, worn joints and propshaft vibration. Our kits are the height we would run ourselves, with the parts that height actually needs, and we say plainly what changes on the road. The Discovery 3 was the first on the integrated body frame and the first with full air suspension as standard, which is where most of its bills come from.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Discovery 3, chassis code L319\u003c\/li\u003e\n\u003cli\u003eEngine: 2.7 TDV6 diesel and 4.4 V8\u003c\/li\u003e\n\u003cli\u003eProduction dates: 2004 to 2009\u003c\/li\u003e\n\u003cli\u003eQuality: Parts Only or Fitted With Alignment\u003c\/li\u003e\n\u003cli\u003ePart number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody\u003c\/li\u003e\n\u003cli\u003eThe failure this addresses: tired suspension: wander, knocks over bumps and uneven tyre wear\u003c\/li\u003e\n\u003cli\u003eLabour time: about 7 hours, included\u003c\/li\u003e\n\u003cli\u003eCoding: none required. Fit it and drive\u003c\/li\u003e\n\u003cli\u003eAlso needed: an alignment, included on the fitted option\u003c\/li\u003e\n\u003cli\u003eTorque: factory figures\u003c\/li\u003e\n\u003cli\u003eWeight: about 46 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: two years or 24,000 miles, whichever comes first\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDampers\u003c\/li\u003e\n\u003cli\u003eBushes\u003c\/li\u003e\n\u003cli\u003eBall joints\u003c\/li\u003e\n\u003cli\u003eDrop links\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eLabour guide: about 7 hours, included. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered to you or your garage, with our fitting notes. Fitted With Alignment is fitted at our workshop with a four wheel alignment and headlamp aim afterwards, which a raised or modified vehicle needs.\u003c\/p\u003e","brand":"Solihull Spares","offers":[{"title":"Parts Only","offer_id":54809547637069,"sku":"SLS-LFT-041-PO","price":1399.0,"currency_code":"GBP","in_stock":true},{"title":"Fitted With Alignment","offer_id":54809547669837,"sku":"SLS-LFT-041-FWA","price":1899.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/6247\/2269\/files\/Discovery_3_Suspension_Refresh_Package_with_Fitting_8c6c01ff-4584-40cf-bc2c-f2cb24624306.jpg?v=1790171563"},{"product_id":"discovery-4-suspension-refresh-package-with-fitting","title":"Discovery 4 Suspension Refresh Package with Fitting","description":"\u003cp\u003eSuspension Refresh Package with Fitting for the Discovery 4: dampers, bushes, ball joints and anti roll bar links replaced at once.\u003c\/p\u003e\u003cp\u003eA modest lift gives clearance for larger tyres and better approach and departure angles. Too much lift, or a lift without the matching parts, gives worse handling, worn joints and propshaft vibration. Our kits are the height we would run ourselves, with the parts that height actually needs, and we say plainly what changes on the road. The Discovery 4 is the Discovery 3 made better, but the 3.0 V6 diesel carries a crankshaft failure risk that every owner ought to know about.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Discovery 4, chassis code L319\u003c\/li\u003e\n\u003cli\u003eEngine: 3.0 TDV6 and SDV6 diesel, 5.0 V8\u003c\/li\u003e\n\u003cli\u003eProduction dates: 2009 to 2016\u003c\/li\u003e\n\u003cli\u003eQuality: Parts Only or Fitted With Alignment\u003c\/li\u003e\n\u003cli\u003ePart number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody\u003c\/li\u003e\n\u003cli\u003eThe failure this addresses: tired suspension: wander, knocks over bumps and uneven tyre wear\u003c\/li\u003e\n\u003cli\u003eLabour time: about 7 hours, included\u003c\/li\u003e\n\u003cli\u003eCoding: none required. Fit it and drive\u003c\/li\u003e\n\u003cli\u003eAlso needed: an alignment, included on the fitted option\u003c\/li\u003e\n\u003cli\u003eTorque: factory figures\u003c\/li\u003e\n\u003cli\u003eWeight: about 46 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: two years or 24,000 miles, whichever comes first\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDampers\u003c\/li\u003e\n\u003cli\u003eBushes\u003c\/li\u003e\n\u003cli\u003eBall joints\u003c\/li\u003e\n\u003cli\u003eDrop links\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eLabour guide: about 7 hours, included. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered to you or your garage, with our fitting notes. Fitted With Alignment is fitted at our workshop with a four wheel alignment and headlamp aim afterwards, which a raised or modified vehicle needs.\u003c\/p\u003e","brand":"Solihull Spares","offers":[{"title":"Parts Only","offer_id":54809547800909,"sku":"SLS-LFT-042-PO","price":1449.0,"currency_code":"GBP","in_stock":true},{"title":"Fitted With Alignment","offer_id":54809547833677,"sku":"SLS-LFT-042-FWA","price":1974.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/6247\/2269\/files\/Discovery_4_Suspension_Refresh_Package_with_Fitting_548e5555-93ca-4997-a692-0d125d718bd8.jpg?v=1790171563"},{"product_id":"discovery-5-suspension-refresh-package-with-fitting","title":"Discovery 5 Suspension Refresh Package with Fitting","description":"\u003cp\u003eSuspension Refresh Package with Fitting for the Discovery 5: dampers, bushes, ball joints and anti roll bar links replaced at once.\u003c\/p\u003e\u003cp\u003eA modest lift gives clearance for larger tyres and better approach and departure angles. Too much lift, or a lift without the matching parts, gives worse handling, worn joints and propshaft vibration. Our kits are the height we would run ourselves, with the parts that height actually needs, and we say plainly what changes on the road. The Discovery 5 is aluminium bodied and largely Ingenium powered, and it still runs air suspension and a two speed transfer box on most specifications.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Discovery 5, chassis code L462\u003c\/li\u003e\n\u003cli\u003eEngine: 2.0 Sd4 and Si4 Ingenium, 3.0 TDV6 and SDV6, D250 and D300\u003c\/li\u003e\n\u003cli\u003eProduction dates: 2017 on\u003c\/li\u003e\n\u003cli\u003eQuality: Parts Only or Fitted With Alignment\u003c\/li\u003e\n\u003cli\u003ePart number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody\u003c\/li\u003e\n\u003cli\u003eThe failure this addresses: tired suspension: wander, knocks over bumps and uneven tyre wear\u003c\/li\u003e\n\u003cli\u003eLabour time: about 7 hours, included\u003c\/li\u003e\n\u003cli\u003eCoding: none required. Fit it and drive\u003c\/li\u003e\n\u003cli\u003eAlso needed: an alignment, included on the fitted option\u003c\/li\u003e\n\u003cli\u003eTorque: factory figures\u003c\/li\u003e\n\u003cli\u003eWeight: about 46 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: two years or 24,000 miles, whichever comes first\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDampers\u003c\/li\u003e\n\u003cli\u003eBushes\u003c\/li\u003e\n\u003cli\u003eBall joints\u003c\/li\u003e\n\u003cli\u003eDrop links\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eLabour guide: about 7 hours, included. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered to you or your garage, with our fitting notes. Fitted With Alignment is fitted at our workshop with a four wheel alignment and headlamp aim afterwards, which a raised or modified vehicle needs.\u003c\/p\u003e","brand":"Solihull Spares","offers":[{"title":"Parts Only","offer_id":54809547997517,"sku":"SLS-LFT-043-PO","price":1524.0,"currency_code":"GBP","in_stock":true},{"title":"Fitted With Alignment","offer_id":54809548030285,"sku":"SLS-LFT-043-FWA","price":2074.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/6247\/2269\/files\/Discovery_5_Suspension_Refresh_Package_with_Fitting_2e4cb9a9-7503-4b9b-9f8f-9bb7c3d930f3.jpg?v=1790171564"},{"product_id":"discovery-sport-suspension-refresh-package-with-fitting","title":"Discovery Sport Suspension Refresh Package with Fitting","description":"\u003cp\u003eSuspension Refresh Package with Fitting for the Discovery Sport: dampers, bushes, ball joints and anti roll bar links replaced at once.\u003c\/p\u003e\u003cp\u003eA modest lift gives clearance for larger tyres and better approach and departure angles. Too much lift, or a lift without the matching parts, gives worse handling, worn joints and propshaft vibration. Our kits are the height we would run ourselves, with the parts that height actually needs, and we say plainly what changes on the road. The Discovery Sport shares its driveline with the Evoque and the Freelander 2 family, including the power transfer unit and the rear coupling.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Discovery Sport, chassis code L550\u003c\/li\u003e\n\u003cli\u003eEngine: 2.2 TD4 early, 2.0 TD4 Sd4 and Si4 Ingenium\u003c\/li\u003e\n\u003cli\u003eProduction dates: 2014 on\u003c\/li\u003e\n\u003cli\u003eQuality: Parts Only or Fitted With Alignment\u003c\/li\u003e\n\u003cli\u003ePart number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody\u003c\/li\u003e\n\u003cli\u003eThe failure this addresses: tired suspension: wander, knocks over bumps and uneven tyre wear\u003c\/li\u003e\n\u003cli\u003eLabour time: about 7 hours, included\u003c\/li\u003e\n\u003cli\u003eCoding: none required. Fit it and drive\u003c\/li\u003e\n\u003cli\u003eAlso needed: an alignment, included on the fitted option\u003c\/li\u003e\n\u003cli\u003eTorque: factory figures\u003c\/li\u003e\n\u003cli\u003eWeight: about 46 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: two years or 24,000 miles, whichever comes first\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDampers\u003c\/li\u003e\n\u003cli\u003eBushes\u003c\/li\u003e\n\u003cli\u003eBall joints\u003c\/li\u003e\n\u003cli\u003eDrop links\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eLabour guide: about 7 hours, included. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered to you or your garage, with our fitting notes. Fitted With Alignment is fitted at our workshop with a four wheel alignment and headlamp aim afterwards, which a raised or modified vehicle needs.\u003c\/p\u003e","brand":"Solihull Spares","offers":[{"title":"Parts Only","offer_id":54809548161357,"sku":"SLS-LFT-044-PO","price":1299.0,"currency_code":"GBP","in_stock":true},{"title":"Fitted With Alignment","offer_id":54809548194125,"sku":"SLS-LFT-044-FWA","price":1749.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/6247\/2269\/files\/Discovery_Sport_Suspension_Refresh_Package_with_Fitting_6f7a3199-0166-45df-bc50-ca8d51ffa21a.jpg?v=1790171563"},{"product_id":"freelander-1-suspension-refresh-package-with-fitting","title":"Freelander 1 Suspension Refresh Package with Fitting","description":"\u003cp\u003eSuspension Refresh Package with Fitting for the Freelander 1: dampers, bushes, ball joints and anti roll bar links replaced at once.\u003c\/p\u003e\u003cp\u003eA modest lift gives clearance for larger tyres and better approach and departure angles. Too much lift, or a lift without the matching parts, gives worse handling, worn joints and propshaft vibration. Our kits are the height we would run ourselves, with the parts that height actually needs, and we say plainly what changes on the road. The Freelander 1 runs an IRD, a viscous coupling and a rear diff in one line, and all three live or die by whether the four tyres match.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Freelander 1, chassis code L314\u003c\/li\u003e\n\u003cli\u003eEngine: 1.8 K Series, 2.0 L Series and Td4 diesel, 2.5 KV6\u003c\/li\u003e\n\u003cli\u003eProduction dates: 1997 to 2006\u003c\/li\u003e\n\u003cli\u003eQuality: Parts Only or Fitted With Alignment\u003c\/li\u003e\n\u003cli\u003ePart number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody\u003c\/li\u003e\n\u003cli\u003eThe failure this addresses: tired suspension: wander, knocks over bumps and uneven tyre wear\u003c\/li\u003e\n\u003cli\u003eLabour time: about 7 hours, included\u003c\/li\u003e\n\u003cli\u003eCoding: none required. Fit it and drive\u003c\/li\u003e\n\u003cli\u003eAlso needed: an alignment, included on the fitted option\u003c\/li\u003e\n\u003cli\u003eTorque: factory figures\u003c\/li\u003e\n\u003cli\u003eWeight: about 46 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: two years or 24,000 miles, whichever comes first\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDampers\u003c\/li\u003e\n\u003cli\u003eBushes\u003c\/li\u003e\n\u003cli\u003eBall joints\u003c\/li\u003e\n\u003cli\u003eDrop links\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eLabour guide: about 7 hours, included. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered to you or your garage, with our fitting notes. Fitted With Alignment is fitted at our workshop with a four wheel alignment and headlamp aim afterwards, which a raised or modified vehicle needs.\u003c\/p\u003e","brand":"Solihull Spares","offers":[{"title":"Parts Only","offer_id":54809548292429,"sku":"SLS-LFT-045-PO","price":1049.0,"currency_code":"GBP","in_stock":true},{"title":"Fitted With Alignment","offer_id":54809548325197,"sku":"SLS-LFT-045-FWA","price":1449.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/6247\/2269\/files\/Freelander_1_Suspension_Refresh_Package_with_Fitting_fe6c93fb-f9c8-40f4-b4b0-2fd4ad1d0a68.jpg?v=1790171563"},{"product_id":"freelander-2-suspension-refresh-package-with-fitting","title":"Freelander 2 Suspension Refresh Package with Fitting","description":"\u003cp\u003eSuspension Refresh Package with Fitting for the Freelander 2: dampers, bushes, ball joints and anti roll bar links replaced at once.\u003c\/p\u003e\u003cp\u003eA modest lift gives clearance for larger tyres and better approach and departure angles. Too much lift, or a lift without the matching parts, gives worse handling, worn joints and propshaft vibration. Our kits are the height we would run ourselves, with the parts that height actually needs, and we say plainly what changes on the road. The Freelander 2 is the most common vehicle through our IRD workshop by some distance, because its power transfer unit and rear coupling are both known weak points.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Freelander 2, chassis code L359\u003c\/li\u003e\n\u003cli\u003eEngine: 2.2 TD4 eD4 and SD4 diesel, 3.2 i6 petrol\u003c\/li\u003e\n\u003cli\u003eProduction dates: 2006 to 2014\u003c\/li\u003e\n\u003cli\u003eQuality: Parts Only or Fitted With Alignment\u003c\/li\u003e\n\u003cli\u003ePart number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody\u003c\/li\u003e\n\u003cli\u003eThe failure this addresses: tired suspension: wander, knocks over bumps and uneven tyre wear\u003c\/li\u003e\n\u003cli\u003eLabour time: about 7 hours, included\u003c\/li\u003e\n\u003cli\u003eCoding: none required. Fit it and drive\u003c\/li\u003e\n\u003cli\u003eAlso needed: an alignment, included on the fitted option\u003c\/li\u003e\n\u003cli\u003eTorque: factory figures\u003c\/li\u003e\n\u003cli\u003eWeight: about 46 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: two years or 24,000 miles, whichever comes first\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDampers\u003c\/li\u003e\n\u003cli\u003eBushes\u003c\/li\u003e\n\u003cli\u003eBall joints\u003c\/li\u003e\n\u003cli\u003eDrop links\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eLabour guide: about 7 hours, included. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered to you or your garage, with our fitting notes. Fitted With Alignment is fitted at our workshop with a four wheel alignment and headlamp aim afterwards, which a raised or modified vehicle needs.\u003c\/p\u003e","brand":"Solihull Spares","offers":[{"title":"Parts Only","offer_id":54809548456269,"sku":"SLS-LFT-046-PO","price":1224.0,"currency_code":"GBP","in_stock":true},{"title":"Fitted With Alignment","offer_id":54809548489037,"sku":"SLS-LFT-046-FWA","price":1649.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/6247\/2269\/files\/Freelander_2_Suspension_Refresh_Package_with_Fitting_60d40143-65ee-4e47-b4d2-d89cc64c497b.jpg?v=1790171563"},{"product_id":"range-rover-l322-suspension-refresh-package-with-fitting","title":"Range Rover L322 Suspension Refresh Package with Fitting","description":"\u003cp\u003eSuspension Refresh Package with Fitting for the Range Rover L322: dampers, bushes, ball joints and anti roll bar links replaced at once.\u003c\/p\u003e\u003cp\u003eA modest lift gives clearance for larger tyres and better approach and departure angles. Too much lift, or a lift without the matching parts, gives worse handling, worn joints and propshaft vibration. Our kits are the height we would run ourselves, with the parts that height actually needs, and we say plainly what changes on the road. The L322 is the Range Rover that most people can now afford to buy and not all can afford to run, which is exactly why honest parts prices matter on it.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Range Rover L322, chassis code L322\u003c\/li\u003e\n\u003cli\u003eEngine: Td6, 3.6 and 4.4 TDV8 diesel, 4.4 and 4.2 V8, 5.0 V8\u003c\/li\u003e\n\u003cli\u003eProduction dates: 2002 to 2012\u003c\/li\u003e\n\u003cli\u003eQuality: Parts Only or Fitted With Alignment\u003c\/li\u003e\n\u003cli\u003ePart number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody\u003c\/li\u003e\n\u003cli\u003eThe failure this addresses: tired suspension: wander, knocks over bumps and uneven tyre wear\u003c\/li\u003e\n\u003cli\u003eLabour time: about 7 hours, included\u003c\/li\u003e\n\u003cli\u003eCoding: none required. Fit it and drive\u003c\/li\u003e\n\u003cli\u003eAlso needed: an alignment, included on the fitted option\u003c\/li\u003e\n\u003cli\u003eTorque: factory figures\u003c\/li\u003e\n\u003cli\u003eWeight: about 46 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: two years or 24,000 miles, whichever comes first\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDampers\u003c\/li\u003e\n\u003cli\u003eBushes\u003c\/li\u003e\n\u003cli\u003eBall joints\u003c\/li\u003e\n\u003cli\u003eDrop links\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eLabour guide: about 7 hours, included. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered to you or your garage, with our fitting notes. Fitted With Alignment is fitted at our workshop with a four wheel alignment and headlamp aim afterwards, which a raised or modified vehicle needs.\u003c\/p\u003e","brand":"Solihull Spares","offers":[{"title":"Parts Only","offer_id":54809548685645,"sku":"SLS-LFT-047-PO","price":1474.0,"currency_code":"GBP","in_stock":true},{"title":"Fitted With Alignment","offer_id":54809548718413,"sku":"SLS-LFT-047-FWA","price":1999.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/6247\/2269\/files\/Range_Rover_L322_Suspension_Refresh_Package_with_Fitting_a3e993a7-d785-4ea1-bf27-9bd1a831cc7e.jpg?v=1790171564"},{"product_id":"range-rover-l405-suspension-refresh-package-with-fitting","title":"Range Rover L405 Suspension Refresh Package with Fitting","description":"\u003cp\u003eSuspension Refresh Package with Fitting for the Range Rover L405: dampers, bushes, ball joints and anti roll bar links replaced at once.\u003c\/p\u003e\u003cp\u003eA modest lift gives clearance for larger tyres and better approach and departure angles. Too much lift, or a lift without the matching parts, gives worse handling, worn joints and propshaft vibration. Our kits are the height we would run ourselves, with the parts that height actually needs, and we say plainly what changes on the road. The L405 is aluminium bodied with four corner air suspension and adaptive dampers, and its parts are dearer than the earlier cars for good reasons.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Range Rover L405, chassis code L405\u003c\/li\u003e\n\u003cli\u003eEngine: 3.0 TDV6 and SDV6, 4.4 SDV8 diesel, 5.0 V8, P400e\u003c\/li\u003e\n\u003cli\u003eProduction dates: 2012 to 2021\u003c\/li\u003e\n\u003cli\u003eQuality: Parts Only or Fitted With Alignment\u003c\/li\u003e\n\u003cli\u003ePart number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody\u003c\/li\u003e\n\u003cli\u003eThe failure this addresses: tired suspension: wander, knocks over bumps and uneven tyre wear\u003c\/li\u003e\n\u003cli\u003eLabour time: about 7 hours, included\u003c\/li\u003e\n\u003cli\u003eCoding: none required. Fit it and drive\u003c\/li\u003e\n\u003cli\u003eAlso needed: an alignment, included on the fitted option\u003c\/li\u003e\n\u003cli\u003eTorque: factory figures\u003c\/li\u003e\n\u003cli\u003eWeight: about 46 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: two years or 24,000 miles, whichever comes first\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDampers\u003c\/li\u003e\n\u003cli\u003eBushes\u003c\/li\u003e\n\u003cli\u003eBall joints\u003c\/li\u003e\n\u003cli\u003eDrop links\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eLabour guide: about 7 hours, included. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered to you or your garage, with our fitting notes. Fitted With Alignment is fitted at our workshop with a four wheel alignment and headlamp aim afterwards, which a raised or modified vehicle needs.\u003c\/p\u003e","brand":"Solihull Spares","offers":[{"title":"Parts Only","offer_id":54809549111629,"sku":"SLS-LFT-048-PO","price":1599.0,"currency_code":"GBP","in_stock":true},{"title":"Fitted With Alignment","offer_id":54809549144397,"sku":"SLS-LFT-048-FWA","price":2174.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/6247\/2269\/files\/Range_Rover_L405_Suspension_Refresh_Package_with_Fitting_690509a8-0d8a-4f77-a755-f8289b09e626.jpg?v=1790171564"},{"product_id":"range-rover-sport-l320-suspension-refresh-package-with-fitting","title":"Range Rover Sport L320 Suspension Refresh Package with Fitting","description":"\u003cp\u003eSuspension Refresh Package with Fitting for the Range Rover Sport L320: dampers, bushes, ball joints and anti roll bar links replaced at once.\u003c\/p\u003e\u003cp\u003eA modest lift gives clearance for larger tyres and better approach and departure angles. Too much lift, or a lift without the matching parts, gives worse handling, worn joints and propshaft vibration. Our kits are the height we would run ourselves, with the parts that height actually needs, and we say plainly what changes on the road. The Sport L320 sits on the Discovery 3 and 4 frame with the same air suspension, the same transfer box and the same diesel engines.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Range Rover Sport L320, chassis code L320\u003c\/li\u003e\n\u003cli\u003eEngine: 2.7 and 3.0 TDV6, 3.0 SDV6, 3.6 TDV8 diesel, 4.2 and 5.0 V8\u003c\/li\u003e\n\u003cli\u003eProduction dates: 2005 to 2013\u003c\/li\u003e\n\u003cli\u003eQuality: Parts Only or Fitted With Alignment\u003c\/li\u003e\n\u003cli\u003ePart number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody\u003c\/li\u003e\n\u003cli\u003eThe failure this addresses: tired suspension: wander, knocks over bumps and uneven tyre wear\u003c\/li\u003e\n\u003cli\u003eLabour time: about 7 hours, included\u003c\/li\u003e\n\u003cli\u003eCoding: none required. Fit it and drive\u003c\/li\u003e\n\u003cli\u003eAlso needed: an alignment, included on the fitted option\u003c\/li\u003e\n\u003cli\u003eTorque: factory figures\u003c\/li\u003e\n\u003cli\u003eWeight: about 46 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: two years or 24,000 miles, whichever comes first\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDampers\u003c\/li\u003e\n\u003cli\u003eBushes\u003c\/li\u003e\n\u003cli\u003eBall joints\u003c\/li\u003e\n\u003cli\u003eDrop links\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eLabour guide: about 7 hours, included. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered to you or your garage, with our fitting notes. Fitted With Alignment is fitted at our workshop with a four wheel alignment and headlamp aim afterwards, which a raised or modified vehicle needs.\u003c\/p\u003e","brand":"Solihull Spares","offers":[{"title":"Parts Only","offer_id":54809549275469,"sku":"SLS-LFT-049-PO","price":1399.0,"currency_code":"GBP","in_stock":true},{"title":"Fitted With Alignment","offer_id":54809549308237,"sku":"SLS-LFT-049-FWA","price":1899.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/6247\/2269\/files\/Range_Rover_Sport_L320_Suspension_Refresh_Package_with_Fitting_d484d2ce-ed9f-488b-a419-1659aee93948.jpg?v=1790171564"},{"product_id":"range-rover-sport-l494-suspension-refresh-package-with-fitting","title":"Range Rover Sport L494 Suspension Refresh Package with Fitting","description":"\u003cp\u003eSuspension Refresh Package with Fitting for the Range Rover Sport L494: dampers, bushes, ball joints and anti roll bar links replaced at once.\u003c\/p\u003e\u003cp\u003eA modest lift gives clearance for larger tyres and better approach and departure angles. Too much lift, or a lift without the matching parts, gives worse handling, worn joints and propshaft vibration. Our kits are the height we would run ourselves, with the parts that height actually needs, and we say plainly what changes on the road. The Sport L494 is the aluminium Sport, sharing most of its hardware with the L405 in a shorter body.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Range Rover Sport L494, chassis code L494\u003c\/li\u003e\n\u003cli\u003eEngine: 3.0 TDV6 and SDV6, 4.4 SDV8 diesel, 5.0 V8, P400e\u003c\/li\u003e\n\u003cli\u003eProduction dates: 2013 to 2022\u003c\/li\u003e\n\u003cli\u003eQuality: Parts Only or Fitted With Alignment\u003c\/li\u003e\n\u003cli\u003ePart number: cross referenced to the factory part number for your VIN and confirmed before dispatch, because supersessions on these vehicles are frequent and one printed number would be wrong for somebody\u003c\/li\u003e\n\u003cli\u003eThe failure this addresses: tired suspension: wander, knocks over bumps and uneven tyre wear\u003c\/li\u003e\n\u003cli\u003eLabour time: about 7 hours, included\u003c\/li\u003e\n\u003cli\u003eCoding: none required. Fit it and drive\u003c\/li\u003e\n\u003cli\u003eAlso needed: an alignment, included on the fitted option\u003c\/li\u003e\n\u003cli\u003eTorque: factory figures\u003c\/li\u003e\n\u003cli\u003eWeight: about 46 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: two years or 24,000 miles, whichever comes first\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDampers\u003c\/li\u003e\n\u003cli\u003eBushes\u003c\/li\u003e\n\u003cli\u003eBall joints\u003c\/li\u003e\n\u003cli\u003eDrop links\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eLabour guide: about 7 hours, included. Land Rover changes specification mid production, often by VIN rather than by model year, so send the VIN or the registration with the order and we confirm the part against the build data before anything leaves. It takes two minutes and it is the difference between a part that fits and a return. We are an independent Land Rover specialist and parts supplier. We are not Land Rover or Jaguar Land Rover and are not appointed by them; the model names are their trademarks and are used here to describe fitment. Everything we sell is chosen for vehicles that actually get used: towed with, loaded, driven through water and parked in fields, rather than for the brochure.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered to you or your garage, with our fitting notes. Fitted With Alignment is fitted at our workshop with a four wheel alignment and headlamp aim afterwards, which a raised or modified vehicle needs.\u003c\/p\u003e","brand":"Solihull Spares","offers":[{"title":"Parts Only","offer_id":54809549406541,"sku":"SLS-LFT-050-PO","price":1549.0,"currency_code":"GBP","in_stock":true},{"title":"Fitted With Alignment","offer_id":54809549439309,"sku":"SLS-LFT-050-FWA","price":2124.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/6247\/2269\/files\/Range_Rover_Sport_L494_Suspension_Refresh_Package_with_Fitting_37a811d0-6b92-4a92-a7ed-f3b33809b93f.jpg?v=1790171564"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/6247\/2269\/collections\/hf_20260923_140046_76f9df37-ceab-4539-9748-f4af86156425.png?v=1790172226","url":"https:\/\/solihullspares.com\/collections\/suspension.oembed?page=2","provider":"Solihull Spares","version":"1.0","type":"link"}